513471
13
Zoom out
Zoom in
Previous page
1/14
Next page
30 EEB 9550.0
Take hold of the oven door
on both sides and close it
slowly. When the oven door
is about half-closed, the
hinges will fall out of the
catches.
The oven door can now be
removed.
Reassembling the oven
door
Take hold of the oven
door on both sides and
push the hinges into
the relevant holes on
the oven.
Slowly open the oven
door full.
Fold down the clamps
on the door hinges.
Close the oven door.
Removing and installing the side racks
Removing the side racks.
Loosen the screws.
Remove the slot-in racks.
Installing side racks
Insert side racks and tighten
down in front.
Folding heating element down/up
Folding heating element (top heat/grill) down
Open lock and fold hea-
ting element down.
Folding heating ele-
ment up
Fold heating element up
and close again with
the lock.
Regenerating the ökotherm
®
catalyst
Set the mode selector to Hot air convection # .
Set temperature control to “*“.
Heat the empty oven for 60 minutes.
What to do if trouble occurs...
[
Repairs may only be carried out by a qualified technician!
You can deal with some problems that occur yourself. First check whether the-
re has been any operating error. Repairs during the guarantee period are not
free of charge, when they are caused by operating errors or non-observance
of the following instructions:
Replacing the oven lamp
[
Caution: Danger of electric shock! Before you open the cover of the
oven lamp the appliance has to be disconnected from the electricity sup-
ply: Switch off the fuse or pull out the mains plug!
[
The lamps become very hot after being in use for some time. Therefore,
the lamps should be changed when they have cooled down!
Type: 25 W, 230/240 V, socket: E14
Important: temperature resistant up to 300 °C!
You can obtain these lamps from KÜPPERSBUSCH customer service or from
your dealer.
Changing the light bulb:
Unscrew the shelf rack.
Carefully lever out the glass
cover with a screwdriver.
Remove the damaged light
bulb and put the new one in.
Reinstall the glass cover.
Fault Cause Remedy
Clock flashes “0.00” and
oven does not function.
Clock is not set – occurs
at startup or after power
interruption.
Set the clock. (p. 22)
Not possible to switch off
the oven.
Electronic component de-
fective.
Disconnect fuse, call custo-
mer service.
Oven does not heat up. Fuse defective. Check and replace fuse, if
necessary.
Mode selector and/or oven
temperature control has
not been switched on.
Set mode selector and tem-
perature control as required.
Oven light no longer works. Lighting defective. Replacing the oven lamp.
Pilot light or heating-up in-
dicator does not light up.
Lighting defective. Have customer service re-
place lamp.
Glass of oven door broken. Switch off the appliance,
call customer service.
Strong smells from oven in
spite of ökotherm
®
catalyst.
ökotherm
®
catalyst must
be regenerated.
See left column.
Strong vinegar smell when
preparing.
Sour doughs, yeast doughs,
dishes with alcohol.
Unavoidable odours.
Fruit juice or protein stains
on enamelled parts.
Moist cake or meat
juices.
Harmless changes in the en-
amel, cannot be remedied.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EEB 9550.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EEB 9550.0 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EEB 9550.0

Kuppersbusch EEB 9550.0 User Manual - German - 17 pages

Kuppersbusch EEB 9550.0 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info