677128
22
Zoom out
Zoom in
Previous page
1/26
Next page
EEB 6850.8
47
Attaching the oven door.
Hold the oven door with both hands and insert the hinges in the corres-
ponding slots. The hinge should fi t snugly.
Slowly open the door fully.
Again lower the supports on the door
hinges.
Close the oven door.
Shelf runner assembly and disassembly
Removing the shelf runners
Remove the shelf runners by loosening them from the chrome nuts that
are located on the sides of the oven.
Remove the shelf runner.
Assembling the shelf runners
Position the shelf runners and attach the nuts.
Folding the heating element down/away
Fold down the heating element (Top heat/Grill)
Open the lock and fold down the
heating element.
Fold away the heating element.
Fold away the heating element and
close it again with the lock.
Regeneration of the ökotherm®
catalyst
The ökotherm® catalyst dissolves the grease particles and smells
produced when roasting with the Hot Air cooking setting. This process is
suffi cient with the normal use of the Hot Air setting. In special cases
(well-cooked roasts in large quantities) it is possible that small grease
particles will be deposited on the catalyst. When you use the oven again
e.g. when cooking a pizza, they will be gradually dissolved.
If you believe that the catalyst is not cleaning as well as it should
(it smells a lot) you can regenerate it by eliminating the remains of
accumulated grease.
Regeneration of the ökotherm® catalyst
Select the Hot Air service function.
Set the thermostat to 200° C and
heat the empty oven for 60 mins.
Assistance in the event
of malfunction
Repairs must only be carried out by an authorised professional.
You may be able to solve some malfunctions yourself. First check if there
has been a problem with the way it is being used. Repairs during the
guarantee period are not exempt from costs in the case of an error in
the way it is being used or if you have not noticed one of the following
situations.
What to do if…
... the sensors or lights do not work.
Check: Is the socket plugged in? Is the fuse in good condition? Has there
been a power failure? Is the child safety lock on?
... one or several sensors do not react to contact but it is possible to
connect the lighting.
Possible cause: The sensors continuously adapt their sensitivity to
ambient conditions. In unfavourable circumstances e.g. if someone leans
on them for a long period of time, it may take several minutes until the
sensors react again.
Wait approximately 15 seconds or disconnect and reconnect the fuse.
Repeat the procedure again if necessary.
The keys will then be reset and will react again on contact.
... one or several sensors do not react after the fuse has been discon-
nected and then reconnected.
Possible cause: Faulty sensor key or element.
After disconnecting and reconnecting the fuse twice, disconnect the fuse
again and inform the after-sales service.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EEB 6850.0 MX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EEB 6850.0 MX in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EEB 6850.0 MX

Kuppersbusch EEB 6850.0 MX User Manual - German - 27 pages

Kuppersbusch EEB 6850.0 MX User Manual - Dutch - 26 pages

Kuppersbusch EEB 6850.0 MX User Manual - French - 26 pages

Kuppersbusch EEB 6850.0 MX User Manual - Spanish - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info