735581
3
Zoom out
Zoom in
Previous page
1/8
Next page
Assembly instrucons CO2 CONTROL AM / AM PLUS
-3-
Assembly 1
1. Cut the drilling template from the packaging.
2. Use the drilling template to drill the mounng holes.
3. Drill appropriate mounng holes corresponding to the mounng type, and insert a dowel
into the hole as required.
4. Open the AM / AM PLUS
unit. The ve mounng screws
for the installaon area
must be removed for this. Note
that when opening the device,
on AM PLUS units, you must
unplug the indicator light.
1
3
2
Assembly 2
5. Mount the AM / AM PLUS unit securely on the wall using the selected
fasteners. You will need four screws to do this.
6. Ensure that the wall is at so as to prevent distoron of the unit when screwing it onto
the wall.
7. The recommended mounng height for the AM / AM PLUS unit is between
1.4 m and 1.8 m above the oor.
4
6
5
Note
Carefully pull o the plug
and securely remove the
hood with the signal lamp
When carrying out any electrical work, the following points should be considered:
- Electrical connecons may only be carried out by a specialist!
- The customer's electrical installaon must comply with the relevant safety regu-
laons (230 V AC, 50 Hz)!
- The mains voltage must be switched o before carrying out any work on the
control system!
Make sure that there are no water / gas lines or power cables in the wall where
you install the unit. If in doubt, use a line detector to ensure that you do not
damage a line.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kundo xT CO2 Control AM 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kundo xT CO2 Control AM 2018 in the language / languages: English as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kundo xT CO2 Control AM 2018

Kundo xT CO2 Control AM 2018 Installation Guide - German - 16 pages

Kundo xT CO2 Control AM 2018 Installation Guide - Dutch - 16 pages

Kundo xT CO2 Control AM 2018 Installation Guide - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info