629288
72
Zoom out
Zoom in
Previous page
1/74
Next page
72
lares
programming manual
ALARMS TRANSMISSION
GRADE 2
The use of pontis (ATS2) and text-to-speech communication is permitted. You must enable a supervision
programming a destination to the 'Periodic Test' event. The 'Periodic Test' period, to be set on the options page,
must be less than 1500 minutes.
In any case the 'Confirm call result' should be always enabled.
OTHER CONSTRAINTS ON PROGRAMMING
The maximum programmable input time on partition page should not exceed 45 seconds.
In case of using scheduler, the notice timeprogrammable on the partitions page must be greater than 0.
Must also select 'Notice' option in 'Acoustic feedback' for each ergo keypad programmed into System.
For each ergo keypad programmed into your system must be enabled 'Input time' and 'Exit time' options
of 'Acoustic feedback' section. Between operations at rest must be selected the 'Notices with PIN' while
'Open Zones' and Partition status' options should NEVER be enabled.
Regarding the processing mode of the alarm zones, the option 'Analogic' must not be selected.
Regarding the balancing of alarm zones, 'Normally Closed' and 'Normally Open' options must not be
selected.
Enabling the 'Self-exclusion' option is allowed only when using the scheduler and enable the 'Automatic
Reinclusion' option.
The 'Pulse lenght' option must be greater than 400 ms.
The 'Include zones after disarm' option must be enabled.
On the options page, faults must be all enabled.
On the options page, the 'Lock Keypad on wrong PIN' option must be enabled.
On the options page, 'Clear tamper memory with user code' option must be disabled.
On the options page, the 'Limit log entry number per event' option must be enabled.
On the options page, the 'Deny system arm on fault condition' option must be enabled.
On the options page, the 'Detect bypassed zone tamper' option must be enabled.
On the options page, the 'Enable faults memory' option must be enabled.
On the options page, the 'EN 50131 arming check' option must be enabled.
The 'BUS Control' option on imago siren must be enabled.
On the events page must be enabled the 'Clear call queue' option for all the events of partition disarming.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ksenia Lares

Ksenia Lares User Manual - English - 40 pages

Ksenia Lares User Manual - English - 45 pages

Ksenia Lares Installation Guide - English - 17 pages

Ksenia Lares User Manual - German - 26 pages

Ksenia Lares Quick start guide - Dutch - 3 pages

Ksenia Lares User Manual - Dutch, French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info