690525

Krups KB 50 Manual

7
Zoom out
Zoom in
Previous page
1/42
Next page
8
EnglishEnglish
DESCRIPTION
A Motor unit
B “
SMOOTHIES” button
C “
ICE CRUSH” button
D Control knob
E Blender jug assembly
e1 Blade unit
e2 Gasket seal
e3 Graduated blender jug
e4 Lid
e5 Measuring cap
F “
0
“ Stand By Mode
G “
“ Min Speed
H “
“ Max Speed
BEFORE THE FIRST USE
n Clean all the parts (E) with warm water and washing up liquid except for the motor unit (A) which must
never be immersed in water or placed under running water (see § Cleaning).
CAUTION: The blades are extremely sharp; handle them with caution when using or cleaning
the appliance.
n Make sure all the packaging has been removed before operating the appliance
n Important note: Turn the control knob (D) to
0
before placing the blender jug on the motor unit (A).
n The appliance will start only if the blender jug is positioned correctly on the motor unit.
n Do not operate the appliance if the lid is not in place.
ASSEMBLING AND FITTING THE JUG
n Fit the gasket seal (e2) on the blade unit (e1) (Fig.1).
n Place the assembly (e1+e2) on the base of the jug (e3). Lock it by rotating the blade unit through a
quarter turn in an anticlockwise direction (Fig.2).
n Introduce the ingredients to the assembled jug.
n Place the lid (e4) on the jug. Place the measuring cup (e5) in its slot on the lid.
n Place the blender jug assembly (E) on the motor unit (A). The blender jug can be placed in two positions:
jug handle to the right or the left of the motor unit (Fig. 3).
USING YOUR APPLIANCE FOR THE FIRST TIME
n Once the blender jug is positioned correctly on the motor unit, plug in the appliance and turn it on using
the desired function.
n Speed selection: Turn the control knob (D) to choose the desired speed; the speed increases gradually
between mini “
” and max “ ”. You can change this speed as required during preparation.
n “Pulse” function: Turn the control knob (D) to the “Pulse” position. Using a succession of pulses gives
finer control over the degree of blending for precise preparations. In this position, the appliance starts
directly on maximum speed. It stops as soon as you release the knob.
n Function “
SMOOTHIES”
This function is used to prepare smooth milkshakes and fruit cocktails. The speed is pre-programmed for
best results. To use this function, turn the control knob to
0
, and press the “SMOOTHIES” button (B)
to start the appliance. To stop it, press the “SMOOTHIES” button (B) again.
CAUTION: the safety precautions are part of the appliance. Read them carefully before using
your new appliance for the first time. Keep them in a place where you can find and refer to
them later on.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups KB 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups KB 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info