507870
25
Zoom out
Zoom in
Previous page
1/27
Next page
DE
FRNL
IT
EN
45
ENGLISH
KRUPS SERIE EA9000
44
3
n Place a recipient with a capacity of at least 0.6 litres under the coffee
nozzles and press OK.
n The descaling phase will start.
4
n When the descaling is complete: Empty your recipient and put it
back, then empty the water tank, rinse it well and fill it again.
n The first rinsing will start.
5
n End of the first rinsing: Empty your recipient and replace it.
6
n End of the second rinsing and of the steam circuit descaling phase.
n The nozzle returns to its cleaning container.
n Refit the Claris Aqua Filter System filter, if necessary.
n Empty your recipient and fill the water tank.
Caution: During the descaling or coffee circuit cleaning programmes, water can splash quite strongly.
If required, place a paper towel on the drip tray.
!
TROUBLESHOOTING
n If your machine is not operating correctly, try to resolve it by referring to this troubleshooting guide.
If the problem persists in spite of this, contact our helpline (See details at end).
9
PROBLEM / MALFUNCTION PROBABLE CAUSES CORRECTIVE ACTIONS
The machine displays a failure,
the software hangs or your
machine has a malfunction.
n Software problem.
n Turn off and unplug the machine.
Remove the filter cartridge. Wait
for 20 seconds and restart the
machine.
n If the failure persists, note down
the message on the screen and
call the KRUPS customer service.
The appliance does not switch
on when the ON/OFF button is
pressed.
n Power failure or blown fuse.
n The mains plug is not pushed into
the mains socket correctly or into
the machine or the mains socket
is faulty.
n The appliance is faulty.
n Check the fuses of your electrical
installation.
n Check that the plug is correctly
inserted into the socket or have
the socket repaired.
n Have the appliance checked by a
qualified technician.
You used pre-ground coffee and
the machine does not make
coffee.
n You have poured too much
pre-ground coffee or the
pre-ground coffee is too fine.
n Use a mixture for espresso coffee
machines.
The espresso or coffee is not hot
enough.
n The temperature of the coffee is
not set high enough.
n The coffee cup is cold.
n Check the coffee temperature in
the “Settings” menu.
n Programme your recipe using the
“Favourites function by
increasing the temperature.
n Warm the cup by rinsing it with
hot water before starting the
preparation.
The coffee is too lightly coloured
or too weak.
n There is not enough coffee in the
coffee bean container.
n Too much coffee is prepared.
n Check that coffee is present in
the container and that nothing is
obstructing the sensor (coffee
bean blocking in the front, etc.).
n Reduce the quantity of water in
the coffee.
The coffee dispenses too slowly.
n The filter cartridge is clogged.
n The machine may need
cleaning/descaling.
n Start a cleaning of the machine.
n Remove/replace the filter
cartridge.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups EA9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups EA9000 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Krups EA9000

Krups EA9000 User Manual - German - 111 pages

Krups EA9000 User Manual - Dutch - 50 pages

Krups EA9000 User Manual - French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info