Manual Krups 866 (page 9 of 16) (English)

515883

9

Zoom out

Zoom in

Previous page

1/16

Next page

"

3. Fill the filter basket with

ground espresso coffee

(see figure 2). Pack the

coffee lightly and clear

any excess coffee from

the rim of the filter hol-

der. This will ensure the

filter holder will fit pro-

perly into the brewing

head.

ATTENTION

Do Not Pack Coffee Tightly.

Do Not Fill More Coffee

Than Indicated By The

4-Cup Marking.

This might cause clogging

or overflow (see section

Problems & Causes).

4. Insert filter holder (e)

containing the filter bas-

ket and coffee into the

brewing head. The filter

holder must be inserted

so that the arrow on the

filter holder is in line with

the beginning of the line

on the machine. Press

the filter hoider upwards

and tum firmly to the

right until it can go no

further. The arrow on the

filter holder should be as

far right between the

"min" (minimum) -

"max" maximum range

as possible. If the arrow

is not at least in the

middle of the "min" -

"max" range, do ot ope-

rate the machine.

Rather, remove filter hol-

der and reinsert as

described above until

the arrow is within the

"min" - "max" range (see

figure 3). The "min" and

"max" markings have

nothing to do with the

strength of the coffee.

Following this procedure

will prevent the filter hol-

der from being dislodg-

ed as pressure builds up

during the brewing pro-

cess.

5. Unscrew the boiler cap

(a) by turning it counter

clockwise (see figure 4).

6. Using the glass carafe,

fill the boiler chamber

with fresh, cold water

(see figure 5).

Measuring Guidelines

The glass carafe (i) has

markings for 2 cups and

4 cups and steaming. .

2 cups of water yields

2 cups of espresso,

3 cups of water yie'lds

2 cups espresso, plus

steam for frothing l"I'Iilkfor

cappuccino.

4 cups of water yields

4 cups espresso.

5-51/2 cups of water yields

4 cups of espresso, plus

steam for frothing milk for

cappuccino. 5-51/2 cups of

water is the upper rim of

the metal band surrounding

the carafe.

CAUTION

Never fill the boiler cham-

ber while your "IL Caffe

Grande" is in the "..a" or

"@" position.

It should be in the "0" (off)

position.

Never pour more than 12

oz. of water into the boiler

chamber.

7. Place the boiler cap (a)

on the machine and turn

it clockwise until it is

secure (see figure 6).

8. Next, place the carafe

lid on the carafe (i) so

that the opening points

towards the pouring

spout on the carafe (see

figure 7).

9. Position the carafe

under the filter hoider.

Make sure that the

nozzle inthe filter holder

points through the open-

ing of the carafe lid (see

figure 8).

ATTENTION

Make sure that the overflow

grid G)is in place.

10.Tomake espresso

directly into the cups,

clip the cup adapter (g)

onto the filter holder

(see figure 9). Place

cups directly under the

two spouts (see figure

10).

11.Now you are ready to

make espresso. Simply

tum the selector switch

to the left "..a" (see

figure 11).The on/off indi-

cator light will illuminate.

12.After approximately

2 minutes the water will

have reached the proper

temperature. The water

1

some how we have lost our coffe machines filter holder
I want to replace it . What is the suitable filter holder size for this machine 51- 54- 58 mm
would you please let me know the correct size .or Send me a drawing that how I can measure it
Hope to hear from you soon .
Sincerely Yours
Dr.Atilla USER Submitted on 20-1-2024 at 20:28
Reply Report abuse
- I hava already Downloded the manual for Krups 866
  I an very sorry I did not find any information for the size if you can find I will be very pleased to know the size
  HOPE YOU CAN HELP ME
  SINCEWRLY yOURS Answered on 23-1-2024 at 22:02
  Vote up Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Krups 866 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups 866 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info