495040
18
Zoom out
Zoom in
Previous page
1/20
Next page
Starting the machine
Before starting the machine for the
first time:
The incoming power line must be
fitted with a 13 amp fuse.
Insert the mains plug into the so-
cket.
Check that the hygrostat (3) is set to
the required value.
You can adjust the drying level by chan-
ging the hygrostat (3) setting.
Each time before you start drying:
Close doors and windows
Switch the appliance on at the push-
button switch (1), the pushbutton
switch will illuminate blue.
The clothes drier works automatically,
i.e. as long as the humidity in the room
remains above the preset value, it
continues to operate. As soon as the
desired level of humidity is reached,
the dehumidifying function of the
dehumidifier stops. If the humidity level
in the room rises again, it automatically
begins to work again.
Each time after you have finished
drying:
Switch the appliance off at the push-
button switch (1).
Cleaning
The refrigeration unit is hermetically
sealed and the fan bearings are pro-
vided with lifetime lubrication. These
parts are therefore maintenance-free.
Wipe the housing with a damp
cloth.
Take hold of the filter grips (2) at the
top of the front grill (4). Pull the filter
upward and remove.
Remove dust from air filter using a
brush and replace
If it becomes particularly dirty, the inside
of the machine will need to be cleaned.
This must be performed by a refrigerati-
on specialist.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kruger AIRSEC 800 AF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kruger AIRSEC 800 AF in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info