KRT706400 EN
Copyright © 2019 VARO P a g e | 4 www.varo.com
5.4 Power tool use and care
▪ Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
▪ Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
▪ Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪ Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
▪ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
▪ Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from
intended could lead to a hazardous situation.
5.5 Service
▪ Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES
▪ When replacing batteries, always replace the complete set. Do not mix old batteries with
new ones.
▪ Prevent removed batteries from short circuiting.
▪ Do not store batteries where the temperature may rise above 50 °C, e.g. in a car which has
been parked in the sun.
▪ Do not burn batteries.
▪ Never attempt to open batteries.
▪ In case of battery leakage, carefully remove the liquid using a cloth. Avoid skin or eye
contact. Do not swallow. In case of skin or eye contact, rinse abundantly for 10 minutes with
clean water and consult a physician.
7 USE
7.1 Display elements
a) Indicator for magnetic/non-magnetic metals
b) Indicator for the current detection mode (wood, live wire, metal)
c) Battery indicator
d) Metal detecting depth display (distance from the center of detection area to the
object measured)
e) Moisture test completed, locking test data
f) Current moisture test mode
g) Display icon that indicates detection area center
h) Detecting signal strength display area
i) Moisture measurement model of building materials
j) “exact” mode of detecting foreign object such as wood
k) “deep” mode of detecting foreign objects such as wood
