770009
5
Zoom out
Zoom in
Previous page
1/7
Next page
KRT706310 EN
Copyright © 2019 VARO P a g e | 5 www.varo.com
Avoid heavy impact to or falling down of the measuring tool. Damage to the measuring
tool can impair its accuracy. After heavy impact or shock, compare the laser lines with a
known horizontal or vertical reference line.
8.3 Switching on and off
To switch on the measuring tool, push the On/Off switch 3 to the “On” position. Immediately
after switching on, the measuring tool sends out the two laser lines and measuring tool is
automatically levelled. The laser will start flashing if angle is +/- 4°.
Do not point the laser beam at persons or animals and do not look into the laser beam
yourself, not even from a large distance.
Press the laser selection key (2) to choose the needed laser lines. The key cycle
sequence is the following: front cross 90° laser line front cross + 90° laser line
front cross
To switch off the measuring tool, push the on/off switch to the “Off” position. When
switching off, the levelling unit is locked.
Do not leave the switched on tool unattended and switch the tool off after use. Other
persons could be blinded by the laser beam.
When not using the measuring tool, switch it off in order to extend the battery life.
8.4 Lock mode
This mode cannot be used to perform horizontal or vertical levelling, because the laser lines
are no longer self-balancing.
1. Keep the power switch 3 off, press the mode button 2 for 3 seconds to turn on the
laser. The laser lines are now locked, and are no longer self-leveling.
2. Press the mode button 2 repeatedly to change the laser projection mode. The key
cycle sequence is the following: front cross 90° laser line front cross + 90°
laser line off
3. Slope your self-levelling cross-line laser level to project a straight line for reference.
In this mode, the laser lines are projected continuously.
4. To turn the laser off, press the mode button 2 repeatedly until the laser shuts off.
8.5 Working Advice
8.5.1 Working with the tripod
A tripod offers a stable, height-adjustable measuring support. Place the measuring tool via the
tripod mount 4 on to the 1/4" male thread of the tripod and screw the locking screw of the
tripod tight.
8.5.2 Holding laterally against a wall or object
For quick checking of heights, the measuring tool can be held laterally against a vertical wall,
cabinets, etc. Take care to hold the measuring tool straightly and calmly.
9 MAINTENANCE AND STORAGE
Check the measuring tool each time before use. In case of visible damage or loose
components inside the measuring tool, safe function can no longer be ensured.
Keep the measuring tool clean and dry at all times to ensure proper and safe working.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kreator-Varo KRT706310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kreator-Varo KRT706310 in the language / languages: English as an attachment in your email.

The manual is 0.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kreator-Varo KRT706310

Kreator-Varo KRT706310 User Manual - German - 8 pages

Kreator-Varo KRT706310 User Manual - Dutch - 7 pages

Kreator-Varo KRT706310 User Manual - French - 7 pages

Kreator-Varo KRT706310 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info