716897
18
Zoom out
Zoom in
Previous page
1/19
Next page
34 35
Inspection reports Inspection reports
Owner: .................................................................................
Address: ...............................................................................
.....................................................................................................
Type: .......................................................................................
Serial no.: .............................................................................
Repair order no.: .............................................................
Inspection result (check)
The high-pressure cleaner was checked by an expert according to the Guidelines
for Liquid Spray Equipment, the defects found have been rectified so that the
Labour Safety can be confirmed.
The high-pressure cleaner was checked by an expert according to the Guidelines
for Liquid Spray Equipment. The Labour Safety cannot be confirmed unless the
defects found are rectified by repair or replacement of the faulty parts.
Scope of inspection o.k. yes no repaired
Type plate (on hand)
Operating manual (on hand)
Protective covering, Protective device
Pressure line (tightness)
Stainless steel pressure gauge (function)
Float valve (tightness)
Spraying device (marking)
High pressure hose / connector (damage, marking)
Safety valve opens at 10 % / 20 % exceeding
power supply cable (damage)
Protective conductor (connected)
On / O switch
Inspection data determined value set value
High pressure nozzle
Operating pressure ………………bar
Switch o pressure ……………..bar
protective conductor resistance not exceeded / value
Insulation
Leakage current
Safety trigger gun locked
The next retest according to the Guidelines for Liquid Spray Equipment has to be
carried out by: Month
................................................................... Year .......................................................................
Place, Date .......................................................................... Signature ...............................................................................
High-pressure cleaners for industrial use have to be checked by an expert every
12 months! Inspection report on annually carried out Labour Safety Inspection (UVV)
according to the Guidelines for Liquid Spray Equipment. (This inspection sheet serves
as proof for the completion of the retest and must be kept carefully!)
Kränzle-test seals: Item no.: UVV200106
Owner: .................................................................................
Address: ...............................................................................
.....................................................................................................
Type: .......................................................................................
Serial no.: .............................................................................
Repair order no.: .............................................................
Inspection result (check)
The high-pressure cleaner was checked by an expert according to the Guidelines
for Liquid Spray Equipment, the defects found have been rectified so that the
Labour Safety can be confirmed.
The high-pressure cleaner was checked by an expert according to the Guidelines
for Liquid Spray Equipment. The Labour Safety cannot be confirmed unless the
defects found are rectified by repair or replacement of the faulty parts.
Scope of inspection o.k. yes no repaired
Type plate (on hand)
Operating manual (on hand)
Protective covering, Protective device
Pressure line (tightness)
Stainless steel pressure gauge (function)
Float valve (tightness)
Spraying device (marking)
High pressure hose / connector (damage, marking)
Safety valve opens at 10 % / 20 % exceeding
power supply cable (damage)
Protective conductor (connected)
On / O switch
Inspection data determined value set value
High pressure nozzle
Operating pressure ………………bar
Switch o pressure ……………..bar
protective conductor resistance not exceeded / value
Insulation
Leakage current
Safety trigger gun locked
The next retest according to the Guidelines for Liquid Spray Equipment has to be
carried out by: Month
................................................................... Year .......................................................................
Place, Date .......................................................................... Signature ...............................................................................
High-pressure cleaners for industrial use have to be checked by an expert every
12 months! Inspection report on annually carried out Labour Safety Inspection (UVV)
according to the Guidelines for Liquid Spray Equipment. (This inspection sheet serves
as proof for the completion of the retest and must be kept carefully!)
Kränzle-test seals: Item no.: UVV200106
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kranzle LX-RP 1600 TST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kranzle LX-RP 1600 TST in the language / languages: English as an attachment in your email.

The manual is 6,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kranzle LX-RP 1600 TST

Kranzle LX-RP 1600 TST Additional guide - English, German - 14 pages

Kranzle LX-RP 1600 TST User Manual - German - 19 pages

Kranzle LX-RP 1600 TST User Manual - Dutch - 19 pages

Kranzle LX-RP 1600 TST User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info