620514

Kraft GKS 108 - 05165 Manual

36
Zoom out
Zoom in
Previous page
1/37
Next page
36
Lower the unit head and grind the tooth slowly.
Release the chain and get ahead two teeth further using the stop (differ between the right and the left teeth, all the teeth on a
side should be sharpened at first)
Repeat the steps so that each teeth is sharpened (to work the teeth on the opposite side, the sharpener head has to be set at
the equal angle on the opposite side; see also Fig. 4)
Störungen - Ursachen - Behebung
Unplug before performing any work on the unit power cord from the socket.
Trouble Cause Troubleshooting
The grinding spot is
burnt
1. The grinding disc is blunt 1. Align the disc.
The sharpening angle
does not fit
1. The grinding disc is worn 1. Replace the disc.
Inspections and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained and care for appropriately. Insufficient maintenance and care may result
in accidents and injuries.
The disc is not allowed to be fitted on the head with force.
The grinding disc bored centre hole diameter shall not be altered.
Only grinding discs fit for the unit are allowed for the use.
Any works in the unit should be done with the unit switched off.
Inspections and Maintenance
Fig. 10
Take steps as shown to replace the grinding disc .
Take the cover off
Loosen the disc locking screw
Take the disc out.
Take the steps in reverse order to fit the grinding disc in
Use only the disc fitted for the use in this unit.
fig. 11
Only perfect grinding discs are allowed for use to prevent
injuries.
To check for hidden defects of the grinding disc, a sound test may be
performed.
To test the disc, pull a pencil through the hole so that the disc may
vibrate freely (see Fig. 11). Now, tap the disc edge with another
pencil. The sound of the disc should be high and clear. If the sound is
muffled or plonk, the disk is damaged and hot fit for use.
A muffled sound indicates fissures etc.
Inspections and Maintenance Schedule
… 36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kraft GKS 108 - 05165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kraft GKS 108 - 05165 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info