46242
180
Zoom out
Zoom in
Previous page
1/183
Next page
Appendix
167
Appendix
Setting Up the KORG MIDI Driver for the Macintosh
1. Start up the PatchBay program.
If the program has been installed correctly, the KORG MIDI Driver icon will be displayed inside
the PatchBay window.
2. Double-click on the KORG MIDI Driver icon. The setup dialog box is displayed.
When “KORG PC IF” is selected as the Interface Type, data sent to the Synth Out Port will
produce sound from the X5DR tone generator, while data sent to the MIDI Out Port will be sent
out through the MIDI Out jack on the back panel of the X5DR.
If “1MHz” is selected as the Interface Type, the Synth Out Port will disappear. Messages sent to
the MIDI Out Port will produce sound from the X5DR tone generator and also be sent to the MIDI
Out Jack on the back panel of the X5DR.
3. Set the “Interface Type” for the port to which the X5DR is connected to “KORG PCIF” (or to
“1MHz”). If the X5DR is connected to an ordinary MIDI interface, select a clock rate that matches
the interface (usually this will be 1 MHz).
4. In order to use the Modem or Printer ports, the Corresponding “Port Enabled” box(s) must be
checked. The “Synth Out Port” is available only if “KORG PCIF” has been selected for the
interface type.
5. Pressing the “Out Port Setting” button displays the MIDI Channel dialog box. In this box, you can
select the MIDI channels/messages to be output to each of the ports.
Only channels/messages which have been checked will be output.
6. Drag the mouse from the arrow on the Out Port of the MIDI application (sequencer, etc.) and
connect it to the “Synth Out Port” of the Korg MIDI Driver. Other ports can be connected in the
same way if necessary.
For information on using the PatchBay program, please refer to the application instruction
manual included with the PatchBay program, or see the description under About PatchBay...
in the Apple menu.
MIDI File Translator
MIDI File Translator is an Apple File Exchange translation program that allows Macintosh MIDI
application programs to recognize an MS-DOS standard MIDI le as an SMF (Standard MIDI
File).
You do not need this application program to operate the KORG MIDI Driver.
Make a copy of MIDI le translator in the folder that contains Apple File Exchange. Select MIDI
File Translation in the MS-DOS
Mac menu that is displayed when you activate Apple File
Exchange and insert an MS-DOS disk. If MIDI File Translation is not displayed, rst select
Other Conversion Program, then add MIDI File Translation.
For details, see the Apple File Exchange documentation in your Apple manual.
180


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg X5DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg X5DR in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info