707422
37
Zoom out
Zoom in
Previous page
1/73
Next page
33
GATE SENSE [0...127]
Specifies the speed of the gate that
will operate according to the
"THRESHOLD" setting.
Lower values for this setting will
make the gate operate more quickly,
causing the vocoder sound to decay
more quickly.
Higher values for this setting will
make the gate operate more gradu-
ally, causing the vocoder sound to
have a longer decay.
If the "THRESHOLD" value is
high, this effect will apply more
readily. If the threshold value is
0, there will be no effect.
THRESHOLD [0...127]
Specifies the level at which the au-
dio signal from the AUDIO IN 1
jack will be silenced.
Increasing this value will cause the
audio signal to be silenced. This lets
you eliminate any noise that might
be heard when no input signal is
present.
If this setting is set excessively
high, the audio signal will also
be cut, and it will be difficult for
the vocoder effect to apply.
HPF LEVEL [0...127]
Adjusts the amount of the high-fre-
quency portion of the audio signal
input from the AUDIO IN 1 jack
that will be mixed into the output
of the vocoder.
Increasing this value will empha-
size the portion that corresponds to
the consonants of speech or singing.
HPF GATE [Disable, Enable]
Specifies whether the high-fre-
quency portion of the signal from
AUDIO IN 1 that is mixed into the
vocoder output will be passed only
during the key-on (note-on) dura-
tion, or will always be allowed to
pass.
Disable ( ):
The high-frequency portion of the
signal will always be passed.
This is effective when you are play-
ing a guitar etc. that is connected
via an effect unit to AUDIO IN 2.
Enable ( ):
The high-frequency portion of the
signal will be passed only during
the key-on (note-on) duration.
Use this setting if you are applying
the vocoder effect only to an inter-
nal sound source, or if you have
connected a synthesizer etc. to AU-
DIO IN 2. (The signal will be passed
when a MIDI note-on is received.)
4. AUDIO IN 1 — VOCODER
These parameters adjust the input from AUDIO IN 1 (the modulator).
Adjust "THRESHOLD" (knob 2) so that noise is not heard when you are not speaking, and adjust "GATE SENSE" (knob 1) so that the
vocoder sound is not cut off unnaturally. Use "HPF LEVEL" (knob 3) to emphasize the consonants (such as "s" sounds) of the input voice.
37

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info