707422
30
Zoom out
Zoom in
Previous page
1/73
Next page
26
7. FILTER EG — SYNTH
DECAY [0...127]
Specifies the time from when the at-
tack level is reached until the sus-
tain level (SUSTAIN) is reached.
SUSTAIN [0...127]
Specifies the cutoff frequency that
will be maintained after the decay
time has elapsed, until you release
the key.
RELEASE [0...127]
Specifies the time from note-off
(when the key is released) until the
level reaches 0.
ATTACK [0...127]
Specifies the time from note-on
(when the key is pressed) until the
attack level (maximum value of the
envelope) is reached.
EG RESET [OFF, ON]
Specifies whether or not the EG will
be reset for the second and subse-
quent note-on. If a new note is
played before the previous note has
finished its release stage, the enve-
lope can either start over from zero,
or continue from the current value.
OFF ( ):
The note will start from the current
EG level.
ON ( ):
The second note-on will start from
a level of 0.
ON
OFF
Note on
Note on (Retrigger)
Note off
The "EG RESET" parameter is
only available if "VOICE AS-
SIGN" is set to Poly, or if "VOICE
ASSIGN" is set to Mono or Uni-
son and "TRIGGER" is set to
Multi.
Figure 7-1
0
Attack Level
Time
Note on
Note off
Cutoff
[1]: Attack Time [3]: Sustain Level
[2]: Decay Time [4]: Release Time
[1]
[3]
[4]
[2]
Here you can make settings for the filter EG, which applies time-variant change to the tone (Figure 7-1). Make these settings to specify the
"shape" of the EG, and use the FILTER parameter "FILTER EG INT" to specify the amount of effect that the EG will have (p.24). By making
FILTER EG settings, you can make the tone change as time passes. Create the desired tonal curve by adjusting the ADSR parameters;
ATTACK (knob 1), DECAY (knob 2), SUSTAIN (knob 3), RELEASE (knob 4).
For details on how an EG (Envelope Generator) works, refer to AMP EG (p.28).
You can use the FILTER EG as a Virtual Patch source modulate a parameter other than the filter cutoff frequency. (p.30)
Filter EG and Amplifier EG
When the Filter EG changes the cutoff frequency, the tone will change.
However depending on the volume changes produced by the Amplifier
EG, this can be heard in different ways. For example by changing the
speed at which the tone and volume begin (attack) or decay, you can
significantly vary the character of the tonal change. It is a good idea to
adjust the changes of both the Filter EG (tone) and the Amplifier EG
(volume) as you proceed with editing.
30

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg microKORG S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg microKORG S in the language / languages: English as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg microKORG S

Korg microKORG S User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info