508737
4
Zoom out
Zoom in
Previous page
1/56
Next page
4
2. Insert a Micro SD Card
(maximum 32 GB).
3. Insert the power supply into the
DC connector and a wall outlet.
Switch the power to ON. The
power and detect indicator
light up.
4. For operation of the motion detection function (or use the remote control), push the detect button to
activate the motion detection function. The indicator will flash a few times and then go out. When
motion is detected the standby indicator flashes once. To end the function push the detect button
again. The standby indicator will light up again. Two beeps will indicate that the function is activated.
One beep indicates the function is deactivated.
5. The different functions can also be operated by remote control.
A: Start manual recording (motion detection is disabled
and the motion detector will record constantly until
the stop button is pressed)
B: Stop manual recording
C: Enable motion detection
D: Disable motion detection
Note: the remote control has infrared transmission, which
means you have to point the remote control towards the
clock for operation.
6. The clock starts to record 3 seconds before motion is detected and 15 seconds after the last
detection with a minimum of 18 seconds of recording. When motion is continually detected the
motion detector will recording constantly. The recording time of any single file should not exceed
15 minutes.
7. The clock can be connected directly to a
monitor or TV for live view or playback.
Use the AV cable to connect (AV OUT)
and the AC/DC adapter. When connected
to a monitor or TV, the following indicators
can be shown on the screen.
A: The motion detector is recording
B: Motion detection
C: Present time and date
D: Recording time
8. For playback or file transfer, connect the clock with the USB cable to a computer or notebook. Switch
on the clock. Open the folder to view the files. Open folder VIDEO to playback the recordings or
copy/delete files (for file playback of files a player that supports AVI files is needed).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-DVRWCA10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-DVRWCA10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info