508770
5
Zoom out
Zoom in
Previous page
1/143
Next page
5
5. Switch on the alarm unit to ALARM or CHIME function. If switched
to CHIME, the alarm unit will sound like a door bell when a door
or window is opened. Switched to ALARM generates a 100 dB
loud siren. When the alarm unit is switched on, the alarm is not
armed (active) yet. Push the ON button on the remote control to
arm the alarm and OFF to disarm. The delay time for entering
and leaving the protected area is between 20~25 seconds.
6. It‘s recommended to test the alarm system for correct operation
with fi rst use and every 3 months.
Procedure:
a) Switch the alarm unit on to ALARM or CHIME (for testing
recommended).
b) Push the ON button on the remote control to arm the alarm.
c) Wait for 20~25 seconds (delay time).
d) Open every door or window one by one and check if the cor-
responding LED lights up and the CHIME sounds.
e) Disarm the alarm if everything operates correct.
f) The alarm system is ready to use.
Note:
1) the alarm unit will give a conformation tone when armed or dis-
armed. The tone for CHIME is different as for ALARM.
2) If a sensor does not need to be switched on, it‘s possible to
switch off every sensor individually with the on/off switch. In this
case the sensor is no part of the alarm system anymore when
armed.
3) A sensor switched to RF+ALARM will always give an alarm sound
on the sensor itself, unless the alarm unit is armed or disarmed.
4) When a sensor is triggered and the siren of the alarm unit sounds,
it needs to be switched off with on/off switch of the alarm unit. Af-
ter that the alarm unit can be switched on again. When the alarm
keeps on going after arming the system, check if every door or
window is closed properly.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic SEC-ALARM120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic SEC-ALARM120 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 10,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info