Manual Konig Electronic KN-RFRO KIT (page 2 of 20) (All languages)

626913

Zoom out

Zoom in

1/20

ENGLISH

The radio control units included in the packaging are already

programmed in bistable mode and ready to use. To reprogram the

remote controls, please follow below steps.

Programming the König receiver or additional remotes:

(To be performed on the receiver, picture 1)

The receiver can be programmed into: monstable or bistable

mode

This König remote can be programmed to control output 1 and output 2

of the receiver in bistable or monostable mode.

Example1: With the monostable mode, you can sent out a pulse to the

central unit of an automatic gate and open it.

Example 2: With the bistable mode, you can switch on a device (like a

lamp) by pressing the button one time, to switch o the device you have

to press the same button once again.

Example 3: If you use the monostable mode with a lamp, you push the

button to switch on the lamp, but when you release this button the

lamp switches o.

So, you only should use the monostable mode if you need a pulse,

otherwise you have to use the bistable mode.

STEP 1:

Press the P1 button on the receiver:

1 time to program output 1 in monostable mode.

2 times to program output 2 in monostable mode.

3 times to program output 1 in bistable mode.

4 times to program output 2 in bistable mode.

STEP 2 (perform immediately after step 1 is carried out):

Keep pressing button A or B on the König remote (picture 2) that you

want to sync until the LED on the receiver begins to ash.

Erasing codes

There are two types of erasing.

A: Erasing of an individual code:

Press key P2 for approx. 2 seconds (release the key); the LED will light

up, press the key on the König remote control you would like to delete.

B: Erasing all acquired codes:

Press key P2 until the LED lights up (approx. 8 seconds).

Receiver

Ant Aux

Not included

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic KN-RFRO KIT in the language / languages: All languages as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic KN-RFRO KIT Manual

Product: