Manual Konig Electronic KN-RCU10B (page 3 of 47) (All languages)

626908

Zoom out

Zoom in

1/47

3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the

indicator is switched on. Then release both buttons (the indicator light will switch off

and then on again).

4. Enter the 4-digit code. For example: the first set of codes for a PHILIPS TV set is

1492. Enter 1492.

Note:

I. The code entered is correct. The indicator light will flash twice before switching

off.

II. The code entered is incorrect. The indicator light will flash three times. Please

re-enter the code.

III. To exit the setting function, press the “Select Equipment Button”. For example:

Press the TV button if the previous setting is TV.

5. After entering in the code, the indicator light will switch off.

6. Check if the other buttons operate correctly. If this is the case, the setting was

successful. If the buttons do not function correctly, please repeat steps 2 to 6 until

you have found the right code.

B. How to Search for Codes Automatically

1. Switch on the home appliance you wish to control. Place the remote control directly

at the home appliance, for example your TV.

2. Press and hold the “TV” button; the indicator light will light up.

3. Press and hold the “Volume+” and “Channel+” buttons at the same time until the

indicator light lights up. Then release both buttons (the indicator light will switch off

and then on again).

4. Press and hold the “POWER” button until the TV set is switched off. Release the

“POWER” button immediately.

5. Check if the other buttons operate correctly. If this is the case, the setting was

successful. If the buttons do not function correctly, please repeat steps 2 to 5 until

you have found the right code.

Setting Favourite Channel

Use this function to set your favourite channels in “Favourite Channel”.

Setting Method:

1. Press the “TV” button and select the equipment you want to set.

Press and hold the “Volume+” and “Channel+” buttons at the same time until the

indicator is switched on. Then release both buttons (the indicator light will switch off

and then on again).

Enter code 9993 manually. The indicator light lights up to indicate that the FAV setting

is in start-up mode.

2. Enter the channel number of your favourite channel. Press the “Power” button to enter

one channel number. Then enter the next channel number. Press the “TV” button after

you have entered all the favourite channels. The indicator light switches off. The

setting is completed. (The memory space is full when the indicator light flashes 5 times.

No channel number can be entered anymore).

For example: Under the TV page you wish to enter channels (02), (38) and (56) as

your favourite channels. Enter the code 9993 manually before entering the channel

number one by one.

02 POWER 38 POWER 56 TV

When the indicator light is switched off, the settings are completed.

3. In normal mode, press the “FAV” button with the remote control pointing at the TV set.

You can find your favourite channel in the order of settings. Press the “FAV” button and

your next favourite channel in the setting list will appear.

Clear Favourite Channel

Setting Method:

1. When setting the “FAV” channel, you can press the “FAV” button to clear the wrong

channel entered or re-set the settings. Press the “FAV” button once to clear an

undesired channel (one-button command). When a “Favourite Channel” is cleared, the

indicator light will flash three times.

2. To clear all favourite channels: Under the “Favourite channel” setting mode, press and

release the “FAV” button until the indicator light flashes three times. This indicates that

the information in the setting is completely cleared. Press the TV button to exit.

Multi-Function Button Setting

There are two multi-function buttons on the remote control: M1 and M2. Each

multi-function button can store data for 20 buttons. You can use this function to combine

the functions of a series of different buttons or commonly pressed buttons into one single

button. After the setting has been completed, press the multi-function button that was

I Have a Cello tv, what is the code to make it work as it is not in the manual Submitted on 14-10-2021 at 11:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic KN-RCU10B in the language / languages: All languages as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic KN-RCU10B Manual

Product: