570514
5
Zoom out
Zoom in
Previous page
1/94
Next page
5
Mains operation
The device is designed for mains power supply AC 230 -240 V~50 Hz. Do not connect the device to
any other power supply to avoid damage that is not covered by your warranty.
1. Connect the connector to the AC socket at the rear of the device. Make sure that it is completely
inserted.
2. Insert the mains plug to a wall outlet.
3. Disconnect the power cord from the mains when not in use.
GENERAL OPERATING INSTRUCTIONS
Select the function ‘Switch of radio’ to ‘RADIO’ position.
On/off
Switch on the device by turning the volume control clockwise, until you overcome the point of
resistance. Switch off the device by turning the volume control counter-clockwise, until you overcome
the point of resistance.
Volume control
Increase or decrease the volume by rotating the volume control to the left or right.
RADIO OPERATION
Select with the FM, AM or AUX buttons to choose desired frequency band.
Advice for better reception
FM: Fully extend the telescopic antenna and position it for better reception.
AM: The device has a built-in antenna. Change the position of the device if reception is poor.
Frequency adjustment
Tune in the desired station by rotating the frequency scale. Rotating clockwise increases and
rotating counter-clockwise decreases the frequency.
The current adjusted frequency for selected band can be read on the frequency scale.
AUX in function
It can be used for listening music from any kind of audio reader device (MP3...etc.)
Connect a cable (double 3.5 mm jack - not included) between the audio reader and the line-in jack of
the radio (on the side of the radio).
Select the desired music. Adjust the volume with the radio volume control.
If you do not use the aux in function, take out the 3.5 mm aux plug from the radio and the unit and enter
to power management mode.
Tone control
Adjust the tone by rotating the tone knob. By rotating to the left the bass is intensified, rotating to the
right intensifies the treble.
GENERAL OPERATION FOR Bluetooth
®
WIRELESS TECHNOLOGY
1. Place the radio and device where they are no more than 10 meters apart.
2. Select the radio Function switch to Bluetooth
®
position.
Select FM or AM with the FM/AUX/AM select button.
3. Activate the Bluetooth
®
function of the device and set it to search for Bluetooth
®
-enabled devices.
4. While searching for the device, the radio LED indicator flashes.
5. Wait until ‘DR70BT’ appears in the list of your Bluetooth
®
device.
6. Select ‘DR70BT’.
7. When Bluetooth
®
connection is made, the radio LED indicator is on.
8. Press the play/pause button for playing or pausing the music.
9. Press the track buttons to select tracks.
10. Adjust the volume & tone control located on the top of the radio for desired volume level and
high-low tone level.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic HAV-TR800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HAV-TR800 in the language / languages: All languages as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info