Manual Konig Electronic HAV-PR22 (page 3 of 56) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

508609

Zoom out

Zoom in

1/56

• Remove the batteries if you are not going to use the radio for a long time

• Remove empty batteries immediately

• Do not use old and new batteries together

TO USE AC ADAPTER

Connect the plug to the radio and the schuko plug to an AC wall outlet. The DC input is 4.5 V

outer + inner -.

CLOCK FUNCTION

1. To set the time press the “POWER” button to go into standby mode.

2. Press “TIME/SET/MEMORY” and use the “HOUR/+” and “MIN/-” to set the correct time.

3. After you are finished press the “TIME/SET/MEMORY BUTTON” again to save the settings.

4. Press “MODE” to view the time on the display.

RADIO OPERATION

1. Move the lock switch to the UP position.

2. Turn on the radio with the “POWER BUTTON”.

3. Adjust the volume with the “VOLUME +/-” button.

4. Select the desired band using the “BAND/WAKE” button.

5. Tune to the desired station using the “HOUR/+” or “MIN/-” buttons. The frequency is displayed on

the display.

6. To improve reception, move the antenna.

7. To switch off the radio use the “POWER BUTTON”.

HEADPHONE

If you want to listen via a headphone, lower the volume, connect the headphone and set the volume to

the desired level again.

NOTE: When the received signal is weak, or the batteries are low, the FM ST indicator may not show

up on the display, even though the sound can still be heard via the headphones.

AUTOMATIC TUNING

To automatically tune to the desired station press and hold “HOUR/+” or “MIN/-” for more than 2

seconds. The radio will then search for the next available station. For SW press the “METER” button

repeatedly to select a station.

DIRECT TUNING

To directly input the desired frequency, press the “ENTER” button and type in the frequency of the

desired station. Press “ENTER” to confirm.

PRESETS

This radio is able to store 40 preset stations, with a maximum of 10 on each band. When you are

listening to the station you want to store, follow these steps:

1. Press “TIME/SET/MEMORY”, MEMO will blink in the display.

2. Press a preset number (0-9).

3. Press the “TIME /SET/MEMORY” button again and the station will be stored.

NOTE: Storing a station needs to be completed in succession without any pauses.

To select a stored preset station, first select the desired band and then press the numerical key which

corresponds with the stored station.

ALARM SETTINGS

TO SET THE ALARM

1. Switch to standby mode.

2. Press the “BAND/WAKE” button repeatedly to select the desired alarm (OFF, BUZZ, RADIO).

3. Hold the “BAND/WAKE” button until the time starts flashing.

4. Set the desired alarm time using “HOUR/+” or “MIN/-” and press “BAND/WAKE” to confirm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HAV-PR22 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Konig Electronic HAV-PR22 Manual

Product: