508686

Konig Electronic HA-INDUC 12 Manual

4
Zoom out
Zoom in
Previous page
1/52
Next page
4
Protection system
This unit has 10 different protection modes. When the induction cooker shows a malfunction, it will stop
working and an alarm will sound. The digital display shows the fault code. Pressing the ON/OFF button
will clear the display and will turn off the cooker. Wait for 1 minute and turn the cooker on again. If the
display shows an error again, there is something wrong with the cooker. The error details are listed
below.
Showing Cause and handle method
EO The circuit has a malfunction. The cooker shows “EO” and automatically stops working.
Check and replace the motherboard.
E1 The pan is not suitable or there is not a pan on the plate. The cooker shows “E1” and
automatically stops working. Replace with a suitable pan in the centre of the plate.
E2 IGBT (Insulated Gate Bipolar Transistor) overheats. The cooker will stop heating after the
buzzer has “beeped” 5 times. Wait for the IGBT to cool before using.
E3 Voltage surge protection. When the input voltage is over 275 V, the cooker will stop
working and show “E3”. It will work again when the voltage returns to the 145-275 V
range.
E4 Low voltage protection. When the input voltage has already dropped below 145 V, the unit
will stop working and show “E4”.
It will work again when the voltage returns to the 145V-275V range.
E5 The sensor of the top plate was open or has short circuited.
The unit will stop working and show “E5”. Check all inner parts and replace if necessary.
E6 The sensor of the IGBT was open or has short circuited. The cooker will stop working and
show “E6”. Check all inner parts and replace if necessary.
E7 The top plate has overheated and the cooker has stopped working. Allow to cool.
Specifications:
HA-INDUC11:
1). Power rate: 2000 W
2). Voltage: 230 V AC ~50 Hz
HA-INDUC12:
1). Power rate: 2000 W
2). Voltage: 230 V AC ~50 Hz
HA-INDUC21:
1). Power rate: 2x1700 W
2). Voltage: 230 V AC ~50 Hz
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic HA-INDUC 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic HA-INDUC 12 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info