570559
5
Zoom out
Zoom in
Previous page
1/56
Next page
55
English
CSFILMSCAN100
Film scanner
Description (g. A)
The lm scanner is a device to scan negative lm or
positive lm into a digital format.
1. Film scanner
2. Accessory slot
Move the accessory
through the accessory slot.
Accessories:
- Negative lm holder
- Positive lm holder
3. Glass plate
4. Scan button
Press the button to scan
negative lm or positive
lm into a digital format.
5. USB port
Use the USB port to connect
the device to the PC.
6. Negative lm holder
Use the negative lm holder
to scan negative lm.
7. Positive lm holder
Use the positive lm holder
to scan positive lm.
8. Cleaning brush
Use the cleaning brush to
clean the glass plate.
9.
USB cable
Use the USB cable to
connect the device to
the PC.
Installation
Before connecting to the PC for the rst time,
install the NimoFilm software.
1. Insert the CD into the CD-ROM drive.
The installation wizard appears.
2. Click “NimoFilm“ to start the installation.
3. Select the setup language.
4. Click “Next”.
5. Select the installation folder.
Default folder: C:\Program Files\Mysher.
6. Repeatedly click “Next” until the installation is
completed.
7. Click “Finish“.
8. Use the USB cable to connect the device to
the PC.
Use
Negative lm holder (g. B1)
Refer to the illustration to scan negative lm using
the negative lm holder.
Positive lm holder (g. B2)
Refer to the illustration to scan positive lm using
the positive lm holder.
Operation sequence
1. Connect the USB cable to the scanner and
the PC.
2. Open the NimoFilm software.
3. Click Capture on the menu bar to show the
the “Photo Preview window.
4. Put the negative lm or the positive lm into
the required accessory.
5. Insert the accessory into the accessory slot.
6. Select the folder to save the image.
Default folder: C:\My Documents\My Pictures“.
7. In the “Photo Preview” window, set the
required image settings.
8. Take one of the following actions:
- Press the scan button to start scanning.
- Click Capture to start scanning.
9. Remove the accessory from the accessory slot.
10. Remove the negative lm or the positive lm
from the accessory.
11. Close the NimoFilm software.
12. Disconnect the USB cable from the scanner
and the PC.
Cleaning and maintenance
Do not use cleaning solvents or abrasives.
Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
Clean the outside of the device using a soft,
damp cloth.
Clean the glass plate using the cleaning brush
(brush side up).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig Electronic CSFILMSCAN100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig Electronic CSFILMSCAN100 in the language / languages: All languages as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info