628362
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
ADJUSTING THE RING VOLUME
The phone
needs to be in stand-by mode (
) when you change this setting.
Press the and
keys.
The ring volume changes each time you press.
There are six levels. You will hear the ring tone for each level you select.
CHANGING THE CONFERENCE KEY
A request must be sent to the PBX to connect a three-way call. R3 (Flash 3) is the standard
and it works in most countries and with most PBXs. If you experience problems creating a
three-way call, this command may need to be changed as described below. Please contact
the telephone administrator in your company or your service provider for further information.
Press and hold the key for three seconds.
You will hear a tone conrming that you are in the conference setting mode.
Press the digit or sequence required by your PBX.
Press .
You will hear a tone conrming that the setting has been saved and that you have exited the
setting mode.
You can exit the conference setting mode by pressing or waiting for 10 seconds.
SETTINGS IN SETTING MODE
There are a number of settings you can change by rst putting the phone in setting mode
and then entering a command followed by and a value followed by as instructed below.
To enter the setting mode, press
with the phone in stand-by mode (
).
You can exit the setting mode by pressing or waiting for 10 seconds.
Changing the Flash/R-pulse time (1)
Flash/R-pulse (Register recall) is used to request a new line from the PBX. Different
countries and PBXs may require different durations for activating the Flash/R-pulse. Duration
requirements should be specied in the technical data for the PBXs.
Applicable values: 1 = by region (standard)
2 = 60 ms
3 = 100 ms (Scandinavia, Europe, Siemens HiPath)
4 = 200 ms
5 = 300 ms
6 = 400 ms (Germany, France, Israel)
7 = 500 ms (USA)
8 = 600 ms
Press .
You will hear a tone conrming that you are in setting mode.
SETTINGS
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KONFTEL 220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KONFTEL 220 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KONFTEL 220

KONFTEL 220 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info