782842
38
Zoom out
Zoom in
Previous page
1/39
Next page
38
English
Error codes
Code Meaning Possible causes Solution
E30 Door lock problem Door is not closed properly Restart after the door is closed
again.
E10 Water injection
problem while
washing
Tap is closed or water flows
too slow.
Inlet valve filter is blocked.
Inlet hose is twisted
Open the tap or wait till the
water supply becomes normal
Check the inlet valve
Straighten the hose
E21 Drain problem
during washing
Outlet hose is blocked or
twisted
Drain pump is blocked
Clean and straighten the
outlet hose.
Clean drain pump filter
E12 Water overflow Water remains in the appliance Restart the appliance
EXX Others - Restart the appliance. If the
problem persists, please
contact the customer service
Troubleshooting
If there are any problems during operation, please refer to the following table. If the problems
cannot be solved as indicated under Solution or if spare parts for self-repair are necessary, please
contact the service center. The respective hotlines are noted in the warranty card, provided with
this product. Please note, that improper self-repair can lead to hazards as well as voidance of the
warranty and should be refrained from, if in doubt.
Problem Possible causes Solution
Product does not work and/or
indicator/display does not light
Interrupted power supply Check the power supply
Door cannot be opened Machine’s protection mechanism
is active
Disconnect from the
power
Heating fault NTC (temperature sensor) is
damaged or heating pipe is aging
Contact the service
center
Water leakage Connection between inlet pipe or
outlet hose and tap or washer-
dryer is not tight.
Drain pipe is blocked
Check and fasten the
water pipes
Clean up outlet hose
Water is overflowing from the
bottom of the machine
The inlet pipe is not connected
firmly.
Outlet hose has water leakage
Fix the inlet pipe
Replace the drain hose
Washing result is not satisfying The clothes are too dirty
Insucient detergent quantity
Select a proper program
Add proper detergent
quantity
Abnormal noise / Strong
vibrations
Check if transport restraints have been removed
Machine is installed on solid floor
Check if any metal parts (e.g. from embroideries) are inside the drum
Adjust the feet of the machine
IM_KWDR 8632 B INV_211029_V08_HR.indb 38IM_KWDR 8632 B INV_211029_V08_HR.indb 38 29/10/2021 10:10 AM29/10/2021 10:10 AM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Koenic KWDR 8632 B INV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Koenic KWDR 8632 B INV in the language / languages: English, German as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info