679116
2
Zoom out
Zoom in
Previous page
1/28
Next page
2
(
EN
)
English
Battery Information
How to Insert and Remove Batteries
Use a small Phillips head screwdriver to loosen
the screw. Insert 2 fresh AA batteries** (LR6)
into the compartment with the correct
polarity (+/-) as shown here.
Install batteries before building models.
** Not included
CAUTION:
To Avoid Battery Leakage
Insert batteries with correct polarity
(+/-) as shown.
Do not mix different types of batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
Do not mix new and used batteries. Only batteries of the
same or equivalent type recommended should be used.
Remove exhausted batteries from the toy; do not short-
circuit supply terminals.
Remove all batteries if the toy will not be used for a long
period of time.
Important Tips
Alkaline batteries are recommended.
Rechargeable batteries are not recommended.
Remove rechargeable batteries before recharging; they must
be charged only under adult supervision.
Non-rechargeable batteries must not be recharged.
Keep components free of dust; do not immerse or use in
water.
Do not dispose of batteries in a re; they could leak or
explode and cause injury.
Do not put rods smaller than 2 inches in any openings of the
motor; they will damage the motor and cannot be removed.
Important Stuff
for Parents and Kids
WARNING: CHOKING HAZARD –
Small parts. Not for children under 3 years.
CAUTION: Keep hands, face, hair and
clothing away from all moving parts.
CAUTION: Be careful not to tip the model
over. Model should be placed on a at and
hard surface.
Do not obstruct track with objects or any part
of your body.
Share the K’NEX experience with your child
and make building with K’NEX a family fun
adventure.
Take your time to enjoy the building process.
Don’t rush!
While you’re building make sure you face your
model in the same direction as the pictures
show in the instructions.
Product and colors may vary.
Keep this important
information for
future reference
The wheelie bin indicates this product cannot be disposed of with
household waste due to presence of hazardous substances.
To protect human health and environment, check your local
authority for recycling advice and facilities
(2012/19/EU, Europe only).
Go to for instruction updates
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Knex 15406 CLOCK WORK ROLLER COASTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Knex 15406 CLOCK WORK ROLLER COASTER in the language / languages: All languages as an attachment in your email.

The manual is 19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info