Manual Knex 15159 (page 2 of 56) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

732644

Zoom out

Zoom in

1/56

CONTENTS

HORNET SWARM

DUELING COASTER . . . . . . . . . 4

Track Building Tips. . . . . . . . . . . . . . . . . .

Tips & Troubleshooting . . . . . . . . . . . . . .

WAVE COASTER . . . . . . . . . . . 52

Languages........................

CAUTION:

•Be sure to insert the batteries correctly and

always follow the toy and battery manufacturers’

instructions.

•Do not mix old and new batteries or alkaline,

standard (carbon-zinc) or rechargeable (nickel-

cadmium) batteries. Only batteries of the same

or equivalent type recommended should be used.

•Always remove weak or dead batteries from the

product; do not short-circuit supply terminals.

•Insert batteries with correct polarity (+/-) as

shown.

Important Tips:

•Alkaline batteries are recommended.

•Rechargeable batteries are not recommended.

•Remove rechargeable batteries from toy before

charging; they must be charged only under adult

supervision.

•Non-rechargeable batteries must not be

recharged.

•Keep components free of dust; do not immerse

or use in water.

•Do not dispose of batteries in a fire; they could

leak or explode and cause injury.

•Remove all batteries if the toy will not be used

for a long period of time.

•Do not put rods smaller than 2 inches in any

openings of the motor; they will damage the

motor, and cannot be removed.

•Help the environment by disposing of your product

and packaging responsibly. The wheelie bin symbol

indicates that the product and batteries must not be

disposed of in the domestic waste as they contain

substances which can be damaging to the environ-

ment and health. Please use designated collection

points or recycling facilities when disposing of the

item or batteries.

BATTERY INFORMATION

FCC Statements:

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for the

compliance could void the user’s right to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference received, including interference that may cause undesired

operation. This model is tested to comply with FCC standards - FOR HOME OR OFFICE USE.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy, and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver. (3) Consult the dealer or an

experienced radio/TV technician. This Class B digital apparatus complies with Canadian ICES-003.

MPORTANT STUFF

FOR PARENTS & KIDS

Keep these instructions in a handy location.

They contain important safety information.

Read all warnings and instructions before you

start to build and operate the model.

WARNING: CHOKING HAZARD - Small parts.

Not for Children under 3 years.

CAUTION: Keep hands, face, hair and clothing away

from all moving parts.

CAUTION: Hair entanglement may result if hair

comes in contact with moving parts of motor.

Adult supervision is required.

CAUTION: Do not use Sound Module close to ear!

Misuse may cause damage to hearing.

•Adult building help is recommended.

•Share the K'NEX experience with your child and make

building with K'NEX a family fun adventure.

•Don't rush! Take your time to enjoy the building process.

•Try to face your model in the same direction as shown

in the instructions while you build.

•Product and colors may vary.

•For additional building help go to the K'NEX web site:

www.knex.com/tips

How to Insert and Remove Batteries:

MOTOR:

•Use a small Phillips head screwdriver to loosen

the screw. Insert 2 fresh AA batteries (LR6) into

the compartment with the correct polarity (+/-)

as shown.

SOUND MODULE:

•Install all batteries in the Sound Module before

you start building.

•Sound Module requires 3 AAA (or LR03)

batteries. Alkaline batteries are recommended.

•Use a small Phillips head screwdriver to open

the Sound Module. Insert 3 fresh AAA batteries

(

LR03

), inside the compartment with correct

polarity (+/-).

•Sound Module may not work properly in direct

sunlight.

•Push the gray

button on the side

to activate sound.

The Sound

Module will shut

off after 10 min-

utes. Push the

button again to

reactivate the

sound.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Knex 15159 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 29,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Knex 15159 Manual

Product: