582117
2
Zoom out
Zoom in
Previous page
1/7
Next page
THX ULTRA2 LOUDSPEAKERS
I M P O RTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9 . DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wider blade or the third prong are provided for your safety. I f
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain
or moisture.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you for your purchase of Klipsch THX
®
Ultra2
loudspeakers. After reading this
manual and connecting your system, you will hear the results of over 55 years of stringent
engineering and class-leading research and development. Like all Klipsch products, your
loudspeakers feature Klipsch Tractrix
®
Horn-loaded Technology– the guiding design for the
first Klipschorn
®
developed in 1946 and for every product that has followed. Horn-loading
allows your speakers to deliver high sensitivity, low distortion, flat frequency response and
wide dispersion, which translates to unequaled power, detail, and dynamics, the hallmark of
“The Klipsch Sound.” Please be sure to fill out the warranty card at the back of this manual
or online at www.klipsch.com so we are better able to serve you. Again, thank you for
choosing Klipsch and we hope that your speakers bring life to your music and movies for
many years.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
U N P A C K I N G
The easiest way to remove the speaker from its carton is to turn the open end of the box
down so that it is resting on a table or the floor, with the flaps spread out and away. Then
pull the box straight up and off. Remove any packing material from the speaker and grille,
place it back in the carton, and store in case you ever need to ship the loudspeaker. Each
speaker comes supplied with rubber stick-on feet that should be applied to prevent any
damage to either the speaker or the surface on which it is resting. (See Figure 1.)
P L A C E M E N T
Your THX Ultra2 loudspeakers will achieve optimum performance when located in
conformance with THX guidelines, on which the following instructions are based. Don’t be
discouraged if some compromise is necessary, however, or if modest adjustments will
make the system look much better in the room. The speakers are engineered to deliver
excellent sound over a relatively wide range of placements within the basic framework of a
5.1-, 6.1-, or 7.1-channel surround-sound installation. This is especially the case for
WDST™ (Wide Dispersion Surround Technology) surround speakers, which offer many
more practical placement options than conventional designs. In the end, all that matters is
what sounds good to you and what works in your home theater.
Before we move on to the specifics, here are some placement considerations that apply
universally.
G
General Rules
Front speakers typically sound best when their tweeters are at approximately ear height
for seated listeners. If this isn’t possible (as it often is not for center-channel speakers), it
is sometimes beneficial to tilt the speaker slightly so that it is aimed into the listening
area. Surround-channel speakers usually perform best when placed slightly above
seated ear level.
If you are putting speakers in a cabinet, try to bring their fronts out far enough that they
are at least flush with the cabinet’s front.
When practical, arrange each speaker so that its woofer is at somewhat different
distances from the floor, the wall behind it, and the wall beside it. It can also help to
have the left and right front speakers at different distances from their nearest side walls.
This sort of staggering helps smooth the bass range.
Any speaker’s bass output and response is strongly influenced by its distance from room
boundaries, such as walls and the floor. Moving a speaker closer to a room boundary will
increase its bass output, while moving it away will reduce the bass. So you will get
maximum bass from a speaker by placing it in a corner and minimum bass by placing it
in the center of the room.
System Configuration
Figure 2 shows a THX-Ultra2 compliant 7.1-channel speaker layout. (Configuration for 5.1
channels is the same minus the surround back loudspeakers behind the listening area.)
KL-650-THX or KL-525-THX LCR’s are used for front left, center, and right channels. The
left and right surrounds are KS-525-THX WDST™ loudspeakers. The surround back
speakers are narrowly spaced KL-650-THX or KL-525-THX LCR’s. In some installations, it
may be preferable to use KS-525-THX’s for the surround back channels due to their
smaller size. Their WDST design works very well in this application. Two KW-120-THX
subwoofers are necessary to achieve THX Ultra2 maximum output requirements. This
specification assumes a very large room, however, and in many installations a single
Figure 1
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klipsch KL-525-THX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch KL-525-THX in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info