584759

Klipsch In-Ceiling IC-6T Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
5. Insert the speaker into the cutout hole. With a #2 Phillips screw-
driver, tighten the four dog clamps until they are seated securely
against the ceiling surface. Do not overtighten.
6. For installations using the 70/100V input connection, set the
switch on the front panel to the desired tap setting. For applica-
tions where16 Ohm impedance is desired, the switch should be
set to 16 Ohms. Note: The speaker comes from the factory set at
the lowest output setting (highest impedance).
7. The IC-5T and IC-6T feature a ±15 degree swivel tweeter
to aim high frequency sound to a desired location. To aim
sound directly at the listening area, gently adjust the horn to
the desired angle.
8. Using the flat of your hand, insert grille into speaker frame
making sure it is securely seated and flush.
Seismic Tab
A seismic tab, located on the back of the speaker, is used
as a secondary security point. Some construction codes
may require its use. To utilize the seismic tab, run a support
wire from a secure point in the ceiling and attach it to the
tab. Be sure to consult the construction codes in your area.
Klipsch recommends the use of this tab in all installations as
a secondary means of support.
70V
100V
70V
100V
60
IC-5T Transformer tap selectable IC-6T Transformer tap selectable
3


Need help? Post your question in this forum.

Forumrules
1

Forum

klipsch-in-ceiling-ic-6t

Reset search

  • There is a red black and blue wire coming from the speaker ceiling box witch one hooks to speaker and where is power wires Submitted on 29-4-2023 at 10:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klipsch In-Ceiling IC-6T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch In-Ceiling IC-6T in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info