584639
4
Zoom out
Zoom in
Previous page
1/4
Next page
3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA71801
1-888-600-5776 • www.klipsch.com
Architectural Specifications
The CA-5T all-purpose two-way compact loudspeaker
system shall include a 5.25" (13.34cm) K-1109-A woofer
and a 1" (2.54cm) K-117-A polymer diaphragm com-
pression driver mounted on a Tractrix Horn. Signal
shall be provided to the transducers via a passive inter-
nal frequency dividing network, with a 2.7kHz
crossover frequency. The enclosure tuning shall be dual
port bass reflex.
Frequency response shall be 70Hz to 20kHz, ±4dB, with
the -10dB down point at 60Hz, measured at one meter,
half space anechoic. The dispersion angle shall be 90º
by 60º nominal (refer to graph). Sensitivity shall be
94dB SPL, measured at one meter, half space anechoic,
with a 2.83V input. Power handling shall be 75 watts
(17volts), to AES standards, continuous pink noise,
50Hz to 10kHz, 6dB peaks. Calculated maximum con-
tinuous output at one meter shall be 109dB SPL.
Nominal impedance shall be 8 ohms, with a 3.8 ohm
minimum at 260Hz. Full-range connections shall be
made via 5-way binding posts.
A removable powder-coated aluminum grille shall be
provided for protection of the transducers from tamper-
ing or damage. The enclosure shall be UV- and
weather-resistant ABS plastic, available in black or
white, with dimensions of 8.625" (21.9cm) high by 12"
(30.48cm) wide, by 8.875" (22.54cm) deep. Net weight
shall be 10 lbs. (4.54kg).
Mounting shall be via protruding stainless steel thread-
ed studs on the side enclosure panels, mating to large
external knobs for positive attachment to the C-shaped
mounting bracket (included).
The system shall be a Klipsch CA-5T loudspeaker.
1M0901
195062
©2001 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
Front View
1/4-20 UNC Stud
1/4-20 UNC Stud
Left Side View
Back View Without Bracket
1/4-20 UNC Stud
Front Side View
1/4-20 UNC Stud
Back View
4.214
2.483
8.000 Ref
4.214
Top View
Safety Point 1/4-20 UNC
Threaded Hole
Bottom View
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klipsch CA-5T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klipsch CA-5T in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info