670623

Klarstein Lausanne 10012127 Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
6 7
This appliance is designed to be permanently xed to a wall at a minimum height of 300mm.The wall
bracket must be tted horizontally and the cable routed to the bottom right of the heater.
A distance of 600mm from bottom of heater to oor is recommended for optimum viewing of fuel bed;
see Fig.1 for recommend xing dimensions.
For optimum viewing, mark the top four screws xing positions on wall in accordance with the recom-
mend xing dimensions- see Fig.2.
NOTE: ensure that the bracket is level by using a Spirit level whilst marking out the hole positions.
Drill holes with a No. six drill bit.
Fix the wall bracket using that the plug and screws provided.
Attach the lower xing bracket the base of the re using the two small black screws supplied; ensure the
bracket is tted so that it is level with the back.
Carefully lift the heater up ensuring that the top rear ledge of heater engages with the wall bracket (see
Fig.2 in circle) and is sitting centrally. This process should be carried out by two people to avoid injury or
damage to property or the appliance.
Gently bring the heater down against the wall.
Mark the lower xing bracket two xing hole positions on the wall-see Fig.3, remove the heater.
Drill the wall and insert the wall plugs.
Ret the heater to the wall and fasten the bottom xing bracket to the wall using the screws provided to
permanently x the heater in place.
Unpack the pebbles from the bag and place them along the light unit in the desired position.
Place the front surround over the front of the re aligning the slots in the brackets at each side of the front
panel with the lugs on the sides of the re-see Fig.4.
Again two people will be required for this operation.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarstein Lausanne 10012127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarstein Lausanne 10012127 in the language / languages: English, German as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info