784294
82
Zoom out
Zoom in
Previous page
1/84
Next page
82
Installation
9.5 Connecting the hob to the mains
Make sure, that the data on the rating plate (V) matches your
supply voltage.
The connection to the power supply must be carried out by a
qualied electrician in accordance with the relevant standard
or with a single-pole circuit breaker, as described below:
The electrical connection must be made properly and
in accordance with the applicable safety regulations.
To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and
re.
The cable must not be kinked or pinched.
The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75˚C at any point.
The cable must be checked regularly.
If the cable is damaged or needs to be replaced, this must be done by
a qualied electrician with the correct tools .
Use the supplied power cord for installation and replace it only with
one of the same type.
!
Aer installation, the connection cable and the
underside of the hob must no longer be accessible.
1 x 230-240V~
40A Ø
6mm²
Device is not suitable for
operation with an EU plug!
When connected to one phase
the original cable must not be used!
New cable not included in delivery.
Work with bridges.
3 x 230V~, 3N~
16A
Black on L1, Brown on L2,
Grey on L3, Blue on N
Note:
If you have any questions,
please contact customer service.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe IND9052FZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe IND9052FZ in the language / languages: English, German as an attachment in your email.

The manual is 3.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info