640448
14
Zoom out
Zoom in
Previous page
1/18
Next page
26 27
[...continued] Using the camera
9. Standby mode
Turn the power switch to the “ON” position. The system will start working and it will enter preview mode
once initialization has finished. If there is no operation for the set time in the system settings, the system will
automatically enter standby power-saving mode. Pressing the “Record” or “Shutter” key, or any key on the remote
control, will wake the system up
Note: Pressing keys on the TFT screen in standby mode cannot wake the system up
Note: The LCD segment screen will not display anything in standby mode
10. AV output connection
In preview state, connect the camera with the display device using an AV cable. All of the camera’s functions can
then be operated
Note: After connecting with an audio and video display device, the TFT screen on the camera and the voice will
be turned off, and the audio and video will be displayed on the device’s display. The LCD segment screen on the
camera will display the corresponding function operations normally
11. HDMI output connection
In preview state, connect the camera with the high-definition display device using an HDMI cable. The camera’s
functions can then be operated
Note: After connecting with the HDMI display device, the TFT screen on the camera and the voice will be turned
off and the audio and video will be displayed on the device’s display
Note: The camera may be in an abnormal state if the HDMI cable is inserted or unplugged improperly when
connecting. It can be recovered once it is re-started and the LCD segment screen will display the corresponding
function operations normally
12. USB connection
In startup state, use the USB cable to connect to a computer. Data stored on the micro SD card can be read and
the LCD segment screen will display the USB connection state icon
• The camera can be charged at any time by connecting to a computer with the USB cable
The camera may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting.
Restarting will recover the camera
13. Turning the TFT display on/off
When the camera is in any status, pressing the “Shutter” key for 3 seconds will turn the TFT display on or off.
Note: The TFT display cannot be turned on or off by pressing the “Shutter” key on the remote control
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitvision Edge HD10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitvision Edge HD10 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kitvision Edge HD10

Kitvision Edge HD10 User Manual - German - 18 pages

Kitvision Edge HD10 User Manual - Dutch - 18 pages

Kitvision Edge HD10 User Manual - French - 18 pages

Kitvision Edge HD10 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info