483664

Kinzo 71799 Manual

4
Zoom out
Zoom in
Previous page
1/56
Next page
4
A
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may a ect the power tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations diff erent from
those intended could result in a hazardous situation.
5.5 Service
a) Have your power tool serviced by a quali ed repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
6 SPECIFIC SAFETY WARNINGS
• Hold tool by insulated grip surface when performing an operation where the cutting tool may contact hidden
wiring or its own cord. When in contact with a live wire, metallic parts of the tool will also become live and
may cause an electric shock to the operator.
• Do not start the tool with the blade touching any surface. The blade action will bounce the tool and may
cause body injury.
• Allow the tool to come to a complete stop before putting it down. A running tool will jerk when the blade tip
contacts any surface.
• Do not cut oversized work pieces
• Do not cut nails or screws unless you are using a blade speci cally designed for this purpose. Inspect your
material before cutting
• Before switching on the tool, be sure the blade in not contacting the work piece.
• Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below
work surface while saw is operating.
7 ASSEMBLY
Disconnect the power plug before carrying out any adjustments or maintenance.
7.1 Installing the blade
• Unplug the power cord  rst.
• Rotate the Quick-release blade clamp (3) anticlockwise with hand.
• At the same time push blade (1) to the deepest position, then release the quick-release blade clamp. Make
sure it is securely fastened.
Before plugging in power cord, always pull on the blade to make sure it is securely locked in
the clamp. Failure to do so may result in serious injury.
71799 manual.indd 4 13-01-11 12:59
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71799 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71799 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info