Manual Kinzo 71792 (page 6 of 44) (English, German, Dutch, French, Polish)

483663

Zoom out

Zoom in

1/44

Important.

For health safety reasons it is imperative that you use a dust bag.

5.2 Fastening the abrasive paper

Easy replacement using Velcro fastening. Ensure that the extractor holes on the abrasive paper and grinding/

sanding disc line up.

5.3 Adjusting the additional handle (Fig. 3)

Slacken the screw (a) and move the additional handle (8) to its optimal position. Lock the additional handle (8)

in place by tightening the screw (a).

6 STARTING uP

6.1 Switching ON/OFF (Fig. 1)

To switch on:

Press the ON/OFF switch (4)

Continuous operation: Secure the switch (4) with the

locking button (3)

To switch o: Press the ON/OFF switch (4) briey

Speed control (Fig. 1/Item 7)

To pre-select the speed turn the knurled screw (7) on

the switch.

Plus direction: Higher speed

Minus direction: Lower speed

The machine can be operated on a temporary or

permanent setting.

6.2 Working with the eccentric grinder/sander

• Place the whole surface area of the sanding disk on the material.

• Switch on the machine and move it with gentle pressure over the workpiece completely circular movements

or moving it to and fro and up and down.

• Use a coarse paper for coarse sanding and a ner paper for nish sanding. You can nd the best paper for the

job by means of testing.

7 REPLAcING ThE POWER cABLE

If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its aftersales

service or similarly trained personnel to avoid danger.

Fig. 3

Fig. 1

71792 manual 230V 2.indd 6 14-01-11 14:44

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71792 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 7,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kinzo 71792 Manual

Product: