483680
5
Zoom out
Zoom in
Previous page
1/44
Next page
5
A
main comPonenTS
1. Lock-on button
2. ON/OFF switch
3. Allen key
4. Dust extraction connector
5. Dust extraction adapter
6. Soleplate
7. Guide roller
8. Saw blade
9. Saw blade holder
10. Safety guard
11. Speed adjusting wheel
12. Clamping screw for saw blade
13. Clamping screw for soleplate
uSe
Replacing saw blades (See Fig.2)
Disconnect the saw from the mains.
Loose the saw blade clamping screws (12) through
the slot on the safety guard (10) by the aid of Allen
key (3) supplied with the tool. Remove the blade
from the holder, insert a replacement and retighten
the screws. Pull the saw blade to check that it is cor-
rectly positioned and locked in place. Make sure that
the back of the saw blade engages in the slot of the
guide roller (7). Connect the saw to the mains.
Retain Allen key in holder on saw to avoid losing it.
Adjusting the soleplate (See Fig.3)
The soleplate (6) can be adjusted 45°(left or right)
in relation to the saw direction to facilitate con-
tour sawing. Loosen the two screws (13) under the
soleplate, adjust the plate to the desired angle and
retighten the screws. Angle setting can be seen on
scale on top of the soleplate.
Switch on and off
Connect the plug to the power supply.
To start the tool, depress the ON/OFF switch trigger
(2). When you release the switch trigger, the tool
turns off. Note: For continuous operation, the switch
button can be locked by pressing the lock-on button
(1) at the same time as the switch trigger. The lock-on
button can be release by pressing the trigger again.
Variable speed
This tool has a speed adjusting wheel (11) that deliv-
ers higher speed by turning to the “+” direction, and
delivers lower speed by turning to “-” direction.
Use the dust extraction connection (Fig. 1)
The dust adapter (4) together with an external
vacuum cleaner takes care of the dust extraction of
the working surface.
1. Place the adapter (4) on the dust extraction con-
nector (5).
2. Connect a domestic vacuum cleaner to the ma-
chine.
Fig. 1
Fig. 2
Fig. 3
71779 manual.indd 5 31-12-10 14:49
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71779 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71779 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info