483677

Kinzo 71777 Manual

6
Zoom out
Zoom in
Previous page
1/57
Next page
6
A
Drill and impact mode selector (Fig. 4)
Fig. 4
The drill and impact mode selector is on the top of this
impact drill.
• Turn the drill /impact mode selector (3) to the drill/impact
position “ ” to select the drill/impact mode of action.
• Turn the drill/impact mode selector to the drill position “ ”
to select the drill mode of action.
Auxiliary handle subassembly
Fig. 5 Fig. 6
The auxiliary handle subassembly (11) will provide additional control, support and guidance for the drill (see
Fig. 5). The handle is adjustable to any position around the 360°handle collar mount.
Installing the auxiliary handle subassembly:
Loosen the collar mount by turning the adjustment knob for auxiliary handle (10) adequately.
Slide the handle over the chuck and secure in the position shown, then slide the handle over the handle
collar mount on the suitable position of this tool. Finally securely tighten the adjustment knob (10).
NOTE: Use auxiliary handle supplied with the tool. Loss of control can cause personal injury.
Depth Gauge (see Fig. 6)
• Your drilling depth can be pre-set and/or repeated by using the depth gauge (4). The depth gauge helps
keep an accurate depth when drilling holes to a set depth.
• Setting depth: loosen the adjustment knob for auxiliary handle (2) adequately, place the straight part of the
depth gauge (4) in the hole and slide the depth gauge to desired depth and securely tighten the
adjustment knob again.
• Checking the depth: check the depth with a steel rule for most accurate measurement and then turn the
adjustment knob (2) to tighten the auxiliary handle in the required position.
For Proper Operations
• Hold the drill with your rst two ngers on the on/o switch.
• Use the auxiliary handle where possible to gain extra control and to prevent fatigue.
• For wood, use twist drill bits, spade bits power auger bits, or hole saw.
• For metal use high seed steel twist drill bits or hole saws.
• For masonry, such as brick, cinder block, cemetery, etc, use carbide tipped drill bits.
• Use enough pressure to keep the bit biting but do not push so hard that do not stall the motor or damage
the bit.
• Always apply pressure in a straight line with the bit.
• Hold the drill rmly to control the twisting of the drill.
71777 76067 manual.indd 6 31-12-10 15:53
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71777 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info