483677

Kinzo 71777 Manual

5
Zoom out
Zoom in
Previous page
1/57
Next page
5
A
Fig. 1
1. Chuck
2. Adjustment knob for depth gauge
3. Drill / impact mode selector
4. depth gauge
5. ON/OFF switch
6. Lock-on button
7. Chuck key
8. Speed control dial
9. Forward/reverse lever
10. Adjustment knob for auxiliary handle
11. Auxiliary handle
Technical Specification:
Rated voltage: 230V AC
Frequency: 50Hz
Rated Power: 500W
Max diameter of drill: 13 mm
No load speed: 0~3000 /min
PREPARATION AND ADJUSTMENT
WARNING: Prior to assembly and adjustment always pull out the power plug from the mains socket.
Changing drill or screwdriver bits
Fig. 1
1. Insert the chuck key (7) in one of the three holes on the side of the chuck (1), turn to open.
Insert the desired bit or drill in the chuck and turn the chuck key the opposite way until the chuck has a
firm grip on the bit.
2. Check that the bit is in the centre of the chuck and is secure.
Switching on/off (Fig. 3)
Fig. 3
• Plug the cord set into power socket.
• Choose rotation direction of the chuck as required through
pushing the forward/reverse lever (9) to the left or right.
Then depress the trigger switch to start operation.
• Release the on/o switch to stop the tool.
• Press the lock-on button (6) when the ON/OFF switch (5)
is completely depressed if the continuous operation is
required.
• Press the trigger switch then release it to disengage the
lock-on button.
• To release the ON/OFF switch and turn the tool o.
Variable speed (Fig. 3)
This tool has a speed control dial (8) that delivers higher speed by turning to the “+” direction, and delivers
lower speed by turning to “-”direction.
Forward/reverse lever (Fig. 3)
• The forward/reverse lever (9) is to determine the rotation direction of the chuck.
• To select forward rotation, release the on/o switch and push the forward/reverse lever to right (R) side of
the tool. To select reverse rotation, push the lever to left (L) side of the tool.
NOTE: When changing the position of the forward/reverse lever, be sure the ON/OFF switch (5) is released
and the motor is stationary.
71777 76067 manual.indd 5 31-12-10 15:53
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71777 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info