483672

Kinzo 29641 Manual

4
Zoom out
Zoom in
Previous page
1/104
Next page
4
A
TECHNICAL DATA
Operating pressure 3-6 bar
Max. operating pressure 8 bar
Air consumption approx. 85-14 l/min.
Length blow-out tube 216 mm
Weight 169 g
Air connection R ¼”
USAGE INSTRUCTIONS
Intended Use
• The air blow gun is intended for cleaning and blowing out material from objects and dicult to access
places.
• “Intended use” includes usage that follows the operating instructions.
• Any use beyond these parameters (dierent media, applying force) or any changes (reconstruction, use of
accessories that are not original) can lead to serious risks and is regarded as use that is contrary to the inten-
ded purpose.
Before first Use
Unpack the air blow gun and check all parts for any damage in transit. Dispose of packaging materials or
store them out of reach of children. Plastic bags etc. may become a deadly toy for children.
Start-up
• Screw the blow out nozzle (1) onto the air outlet opening (2).
• The air blow gun is equipped with an air quick coupling adaptor (4). For your own safety it is not recommen-
ded to use a permanent connection between the air blow gun and the air hose, but use the quick coupling
adaptor instead.
• Power up the compressed air generator.
• Press the trigger (3) to start the delivery of air. The more you press the trigger, the higher the air output rate
will be.
• Release the trigger to stop the delivery of air.
• After work, disconnect the air tool from the compressed air supply.
MAINTENANCE AND CARE
Air Pressure and Air Volume
• The air blow gun requires clean and oil-free air. Therefore do not use an oil-fog lubricator within the air sup-
ply system.
• If possible, only use compressed air hoses for the air supply that have not been previously used with air tools
requiring an oil-fog lubrication system.
• Operate the air blow gun with a pressure of 3 – 6 bar. When using higher pressure than the max. permitted
pressure of 8 bar, its usable life will be reduced drastically. Operate the air blow gun using a compressor with
an air suction capacity of at least 140 l/min. The ideal capacity is provided by compressors with a suction
capacity of 200 – 300 l/min.
• Only use air hoses with an inner diameter of at least 9 mm. When setting up the air pressure, always keep in
mind that the pressure will decrease by approx. 0.6 bar when using a 10 m long hose with an inner diameter
of 9 mm.
Maintenance and Care
• To ensure proper functionality and a long lifetime, diligent maintenance is essential.
• Add a few drops of oil to the trigger pin seal at regular intervals. Apart from that, the air blow gun is mainte-
nance free.
• Do not allow liquids to enter the air blow gun and never immerse it into liquids. Water in the compressed
air inlet can damage the machine. Therefore it is recommended to drain the air lines and the compressor
regularly! Also clean the air filters at regular intervals.
• For operating pneumatic tools, clean air is required. Corrosion residues, dust and dirt from the pneumatic
pipes reduce the eciency of the tool and will cause technical problems.
• If necessary, clean the air blow gun with a moist cloth.
• Do not use abrasive or aggressive chemicals as benzene or thinner, which may dissolve plastic parts.
29641 manual.indd 4 07-11-11 12:07
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 29641 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 29641 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info