Manual Kicker DX1400 (page 9 of 12) (English)

508884

Zoom out

Zoom in

1/12

SETTING GAIN CONTROLS AND SUBSONIC FILTER

If you are using the Remote Gain Controller, make sure the remote gain control is

turned fully clockwise before starting the amplifier gain control setting. The gain control

on the amplifier chassis is provided for level matching purposes; it does not give the ampli-

fier any more power by turning it up - its purpose is to adjust the sensitivity of the ampli-

fier in relation to the output level provided by the source.

Start with the amp gain set to minimum by turning the control on the amp counter-

clockwise. Turn the source level up until distortion is barely audible - this will be at about

90-95% of full volume. Raise the amplifier gain until distortion is just audible. The gain is

now set correctly. Check the level with CD/tape and tuner to make sure the adjustment is

correct for all sources.

Your DX-series amplifier has a built-in subsonic filter which cuts all the ultra-low fre-

quency information and allows the amplifier to concentrate energy where it does the

most good- above 25Hz. The switch, accessible from the end panel, gives you the option

of having this filter engaged or disengaged. For best sound quality and extended frequen-

cy response leave the filter off (switch in the OUT position). If you are using this amplifier

with ported boxes, bandpass enclosures, or in a maximum SPL vehicle you will want to turn

the subsonic filter on (switch in the IN position).

SPEAKER OUTPUT

+–

MODULE

DOCKING

PORT

RIGHT

FILTER GAIN

REMOTE GAIN

LEFT

OUTPUT INPUT

Subsonic Filter is ON

when switch is depressed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kicker DX1400 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kicker DX1400 Manual

Product: