736641
5
Zoom out
Zoom in
Previous page
1/26
Next page
GB
GB
construction, this product should be serviced
regulary (once a year) by specialist retailers.
Before carrying out cleaning or maintenance
work, always disconnect the running belt
from the power supply (i.e. pull the plug
out of the socket).
Please ensure that liquids or perspiration
never enter the machine or the electronics.
Repairs on the electrical components in the
unit should be carried out by qualified persons
only.
Always observe the general safety rules and
precautions for working with electrical equip-
ment.
Before beginning your program of training,
study the instructions for training carefully.
All electric appliances emit electromagnetic
radiation when in operation. Please do not
leave especially radiation-intensive appliances
(e.g. mobile telephones) directly next to the
cockpit or the electronic controlsystem as
otherwise values displayed might be distorted
(e.g. pulse measurement)
Prior to training attach the cord of the
running belt stop trip to your clothing.
The KETTLER treadmill has an emergency stop
mechanism for your safety. Before starting
your workout, fasten the cord of the safety
key to your clothing. If the treadmill has
been shut down by removing the safety
key, restart it by reinserting the key. The
treadmill does not restart automatically.
Further instructions concerning the handling
of the safety cut-out can be found in the
operating instructions for the training computer.
An unmonitored use of the treadmill by other
people can be prevented by removing the
safety key and keeping it safely hidden.
In case of an emergency, hold on tightly to
the handrail with both hands and leave the
treadmill by means of the antislipping surface
of the lateral platform. Activate the emergency
stop mechanism (safety cut-out).
Any interference with parts of the product
that are not described within the manual
may cause damage, or endanger the person
using this machine. Extensive repairs must
only be carried out by KETTLER service
staff or qualified personnel trained by
KETTLER.
Should you be in any doubt, please consult
your dealer.
Handling the equipment
Standards:
Run!me 07879-000:
The machine complies with the DIN EN 957 - 1/ 6,
class HC. It is therefore unsuitable for thera-
peutic use.
Before using the equipment for exercise, check
carefully to ensure that it has been correctly
assembled and checked.
It is not recommended to use or store the appa -
ratus in a damp room as this may cause it to
rust. Please ensure that no part of the machine
comes in contact with liquids (drinks, perspira-
tion etc.). This may cause corrosion.
The running belt is designed for use by adults
and children should not be allowed to play
with it. Children at play behave unpredictably
and dangerous situations may occur for which
the manufacturer cannot be held liable. If, in
spite of this, children are allowed to use the
equipment, ensure that they are instructed in
its proper use and are supervised accordingly.
Always wear suitable shoes (running shoes)
when using the running belt.
Before beginning your first training session,
familiarize yourself thoroughly with all the
functions and settings of the unit.
If the equipment is in regular use, check all its
components thoroughly at appropriate intervals.
Pay particular attention to the tightness of
bolts and nuts.
In case of a regular use of the running belt,
the cold running belt has to be serviced every
100 operating hours or every 2 month with
silicone oil.
Depending on the degree of use and load to
which the unit is subjected, the belt may tend
to stretch or slip. Tighten the belt as described.
Adjust the tightness of the belt as described in
section “handling“ (Fig. 4).
Assembly
instructions
All KETTLER products are designed in accordance
with the latest safety regulations and undergo a
constant process of quality control during manu -
fac turing. The knowledge gained in this process
is used to constantly improve and develop our
products. In order to offer our customers the very
best in product quality, we reserve the right to
make technical changes at any time. In spite of
this, should you have any cause for complaint,
please contact your KETTLER dealer.
For your safety
The running belt should be used only for its
intended purpose, i.e. for physical exercise
(walking and jogging) by one (1) adult persons.
The running belt is not suitable for commer-
cial use.
Any other use of the equipment is prohibited
and may be dangerous. The manufacturer
cannot be held liable for damage or injury
caused by improper use of the equipment.
Damaged components may endanger your
safety or reduce the lifetime of the equipment.
For this reason, worn or damaged parts should
be replaced immediately and the equipment
taken out of use until this has been done.
Use only original KETTLER spare parts.
The running belt has been designed in accor-
dance with the latest standards of safety.
Incorrect repairs and structural modifications
(e.g. removal or replacement of original parts)
may endanger the safety of the user.
The running belt must be set up on firm even
ground. Ensure that the power cable is not
pinched and that no-one can trip over it.
Always ensure that the space under the
running belt is kept free, i.e. that there
are no objects, pets etc. beneath it.
Never touch the moving belt with your hands.
Also ensure that there are no objects close
to the belt or the rollers which could be pulled
into it thus causing injury or damaging
the unit itself.
The running belt “Run!me“is not suitable for
use by persons weighing over 100 kg.
The unit should be positioned in such a way
that there is a space of 100 cm on both sides
and 200 cm behind it.
The unit requires a power supply of 220-230 V /
50 Hz. It should be connected only to an
earthed safety socket with a single 16-A fuse.
Do not under any circumstances carry out
electrical repairs or alterations yourself.
Always ensure that such work is done by
a properly qualified electrician.
Do not use a multiple power socket for the
running belt. If an extension cable is being
used, ensure that it complies with the VDE
regulations.
When the unit is not in use, unplug it from
the power supply.
To ensure that the safety level is kept to the
highest possible standard, determined by its
Before assembling or using the exercise
cycle , please read the following instruc-
tions carefully. They contain important
information for use and maintenance of
the equipment as well as for your perso-
nal safety.
Keep these instructions in a safe place
for maintenance purposes or for ordering
spare parts.
9
8
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Run me - 07879-000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Run me - 07879-000 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info