772975
3
Zoom out
Zoom in
Previous page
1/13
Next page
5
Assembly
The child’s seat must be positioned such that it is not in contact with the luggage carrier. The distance between
luggage carrier and tube shackle must be min. 25 mm.
Fix the tube shackle parallel to the ground. This results in a seat which is slightly inclined towards the rear such
that the child may not slide out of the seat. The seat back is slighty inclined to the rear.
The load centre (marked by a red point) may only be within 10 cm behind the wheel hub (explained in detail
below).
In case of saddles with uncovered springs the latter have to be covered as a protection against bruises (e. g.
art. nr. 8947-690).
Further to that the rear wheel is provided with an additional cover on the spokes or a protective device to pre-
vent dresses from getting mingled with the spokes.
Handling and security of riding
Please observe that the riding behaviour of the bicycle changes when the child’s seat is used (irrespective of
child being present or not). Owing to the increased centre of gravity the bicycle's behaviour may unfavourable
change and the bicycle's dirigibility may be impaired. For this reason, ride carefully – in particular with regard
to braking and evading manoeuvres. Also avoid riding with one hand.
Ask the child to sit quietly. Sudden weight transfers by the child may considerably affect your safety during a
ride.
Pay attention that the child does not handle any objects (e.g. toys) which might get mingled with the whels. Clo-
thes or extremities of the child should never get into turning parts or into the brake and transmission system.
Protect your child from sharp edges at your bicycle, from worn cables and other parts that might lead to inju-
ries.
Before beginning a ride and during a tour check whether or not the child’s seat is positioned firmly on the bicy-
cle; also check screwings and other connections for proper seat.
Only transport the child with the safety belt being fastened and the foot straps being closed. Have a check during
the breaks that those safety devices are still unopened.
Even if no child is carried, close the seat belt to avoid that it gets into turning parts or that it clings to parts that
are passed during riding.
Pay attention to a suitable and sufficiently warm clothing of your child.Children who are sitting still normale cool
down faster than the rider.
Do not park your bicycle before the child has left its seat.
We recommend that adult and child wear suitable helmets.
Adjust the headrest such that its upper edge matches the child's ear level.
In cases of doubt and any other question do not hesitate to contact your specialized dealer.
Never leave your child alone and unattended in its child’s seat due it the danger of the bicycle falling over.
If seat or cloth are damp it is possible that the colour of the seat could mark pale coloured cloths due to friction.
Service and maintenance
Always use environmentally friendly substances (never aggressive or etching ones) for the cleaning and service
of the child’s seat for bicycles.
You can also clean safety belts, if required. In this case it is especially important not to use aggressive substances!
Usually a weak rinsing lye or suds.
Accessories
If you want to attach the seat to another bicycle, you can order a second carrier for the child’s seat. (item no.
8947-633).
To secure the child’s seat from theft, a cylinder lock can be inserted into the seat support bracket (see page 18).
The lock (type K.01.32.G1) is not supplied with the seat. The lock is obtainable from: Firma P.C. Fischer, Kai-
serstraße 126, D-58300 Wetter/Ruhr, tel. (0) 23 35/42 64, fax (0) 23 35/58 46
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kettler Flipper 8947-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kettler Flipper 8947-500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info