677867
56
Zoom out
Zoom in
Previous page
1/140
Next page
RAM Styles and Flash RAM
Thanks to the velocity of the internal hard disk, a Style stored in any Folder of the hard disk can be loaded in RAM. The Style can be loaded
while the Arranger is running or when it is stopped and it only takes a matter of seconds. On the contrary to the Custom Styles stored in Flash
RAM, a RAM Style is lost when the instrument is turned off. Deciding whether a Style is to be loaded in RAM or in Flash RAM is an organisational
choice but from a practical point of view the only difference is the loading time and the possibility, using the Custom Styles, to have your pre-
ferred Styles as soon as you turn the SD1 on. However, for the RAM Styles too it is possible to create a list of Styles to be loaded when turning
the instrument on.
It is no longer possible, as was the case for Ketron X1, to copy and load one or a number of Styles in floppy disk to Flash RAM but they must first
be copied on hard disk then must be loaded from there. The Ram Styles constitute the transition from hard disk to RAM. To distinguish a RAM
Style in RAM from a Style in Flash RAM, the display shows “DISK” under the name and the number of the Style loaded.
The RAM Styles can be loaded one at a time (Single RAM Style) or in block (Block RAM Style). The more complete options are provided with
Master Folder enabled, but the single Styles can also be loaded from a Folder that is not correlated to Master Folder. The table below illus-
trates the differences:
Function Master Folder enabled Master Folder disabled
Single RAM Style – Loading from main page of display Yes Yes
Single Ram Style – Loading with Arranger running Yes Yes
Display of the list of Styles stored in the Folder (Pattern List) Yes Yes
Display of the Folder contents Yes No
Reference Folder 95 Style Folder selected previously
but not correlated with those
of Master Folder
Cancel a Style in RAM Yes No
Display of the memory available and of the memory required by the Style Yes No
Creation of a Block RAM Style Yes No
Loading directly in Flash RAM No Yes
LOADING RAM STYLES WITH MASTER FOLDER ENABLED.
There are two ways of loading a single Style: The first is used to directly call up the Style by entering the number assigned within Folder 95
Styles. The second is used to display a list of all the Styles in Folder 95 Styles from which that desired is selected, or to display the whole con-
tents of Folder 95 Styles.
DIRECTLY LOADING A SINGLE RAM STYLE
From the main page of the display, enable the MASTER FOLDER push button and the SINGLE RAM STYLE.
Ensure that the BLOCK/LIST push button is not lit.
Enter the 3-figure number of the Style to be loaded using the numeric keypad (STYLES push buttons). The status of the Arranger is not
important.
The symbol “#” will appear next to the name of the Style to point out that the SD1 is loading it in RAM.
Upon completion, the name of the Style loaded appears without any symbol.
To call up the Custom Styles press the CUSTOM STYLE push button.
LOADING ONE OR A NUMBER OF SINGLE RAM STYLES WITH PATTERN LIST
From the main page of the display, enable the MASTER FOLDER push button.
Press the BLOCK/LIST push button. The page that is called up shows all the Styles (in Pattern format) stored in Folder 95 Styles. See the
next section for the functions available in this page.
SD1 Owner’s Manual
56
56

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ketron SD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ketron SD1 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron SD1

Ketron SD1 User Manual - German - 156 pages

Ketron SD1 User Manual - French - 140 pages

Ketron SD1 Additional guide - All languages - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info