511240
151
Zoom out
Zoom in
Previous page
1/152
Next page
ADDENDUM
This supplement provides information not available at the time the instruction manual was printed and/or corrects erroneous
information appearing in the instruction manual.
Sub-audible tone functions (Tone/ CTCSS/ DCS) in Satellite mode:
FM sub-audible tone functions (Tone/ CTCSS/ DCS) can be enabled in Satellite mode and the Tone On/Off status can be stored in
each Satellite memory channel.
Although the Tone On/Off status is stored in each Satellite memory channel, the sub-audible tone frequency/ code cannot be stored
due to limited memory capacity. The tone frequency/ code configuration from the normal VFO (VFO-A or VFO-B) is used instead.
The tone frequency/ code search function cannot be operated in Satellite mode.
Encoding and decoding is performed according to the data from the uplink frequency band.
TS-2000XE specifications:
For the frequency range of the transmitter (page 105) and receiver (page 106), refer to “E-type” under the TS-2000/ TS-B2000
column. Other specifications remain unchanged.
TS-2000E/ E2, TS-B2000E/ E2, and TS-2000XE specifications:
The 7 MHz band frequency range of the transmitter (page 105) has been expanded to “7.0 MHz - 7.2 MHz”.
AI Commands:
The TS-2000/ TS-B2000 transceivers do not support the following old AI commands: "AI 1;" and "AI 3;". There may be
incompatibilities between the transceiver and your PC logging software; changes may not be reflected when using these commands.
IA
.FFO/NOnoitcnuf)IA(noitamrofnIotuAehtsdaerrosteS :sretemaraP
1P
FFOIA:0
NOsitamrofIAdednetxE:2
reviecsnarteht,detcelessitamrofIAdednetxeehtnehW
.sretemarapehtsdnesyllacitamotua
:etoN
nidetroppustonera)sdnammocIAdlo(;3IAdna;1IA
.0002B-ST/0002-STeht
teS
1 2 3 4 5 6 7 8 9 01
A I
1P ;
daeR
1 2 3 4 5 6 7 8 9 01
A I
;
rewsnA
1 2 3 4 5 6 7 8 9 01
A I
1P ;
IF Commands and OI Commands:
SUPLEMENTO
Este suplemento contiene información no disponible en la fecha que se imprimió el manual de instrucciones y/o corrige información
errónea que aparecía en dicho manual.
Funciones de tono subaudible (Tono/ CTCSS/ DCS) en modo Satélite:
Las funciones de tono subaudible en FM (Tono/ CTCSS/ DCS) se pueden activar en el modo Satélite, y el estado de tono activado/
desactivado se puede guardar en cada canal de memoria Satélite.
Aunque el estado de tono activado/desactivado se guarda en cada uno de los canales de memoria Satélite, el código/frecuencia
de tono subaudible no se puede guardar debido a la capacidad limitada de memoria. En su lugar, se utiliza la configuración de
código/ frecuencia de tono del VFO normal (VFO-A o VFO-B).
La función de búsqueda de código/ frecuencia de tono no se puede utilizar en el modo Satélite.
La codificación y decodificación se realiza con arreglo a los datos de la banda de frecuencia ascendente.
Especificaciones de TS-2000XE:
Para conocer el rango de frecuencias del transmisor (página 105) y del receptor (página 106), consulte el “Tipo E” en la columna del
TS-2000/ TS-B2000. Otras especificaciones permanecen invariables.
Especificaciones del TS-2000E/ E2, TS-B2000E/ E2 y TS-2000XE:
El rango de frecuencias de la banda de 7 MHz del transmisor (página 105) se ha ampliado hasta “7,0 MHz – 7,2 MHz”.
Comandos AI:
Los transceptores TS-2000/TS-B2000 no soportan los siguientes comandos Al antiguos: "AI 1;" y "AI 3;". Puede haber
incompatibilidades entre el transceptor y el software de registro de su PC; no se producirán cambios cuando se utilicen estos
comandos.
IA
nóicamrofnIednóicnufaledodatseleeeloavitcased/avitcA
.)IA(acitámotuA
:sortemáraP
1P
odavitcasedlA:0
odavitcaátseodidnetxeIAotamrofleetnemaloS:2
aívnerotpecsnartle,odidnetxeIAotamrofleanoiccelesesodnauC
.etnemacitámotuasortemárapsol
:atoN
noson)sougitnaIAsodnamoc(;3IAy;1IAsodnamocsoL
.0002B-ST/0002-STleropsodatropos
-elbatsE
rec
1 2 3 4 5 6 7 8 9 01
A I
1P ;
reeL
1 2 3 4 5 6 7 8 9 01
A I
;
-nopseR
red
1 2 3 4 5 6 7 8 9 01
A I
1P ;
B59-2409-10
FI
.sutatsreviecsnartehtseveirteR :sretemaraP
21P
tilpS:1,xelpmiS:0
.degnahcsiecnetnessihT
IO
noitamrofnIdnaBetisppO
.degnahcsiecnetnessihT
:sretemaraP
21P
tilpS:1,xelpmiS:0
.degnahcsiecnetnessihT
Comandos IF y Comandos OI:
FI
.rotpecsnartledodatselearepuceR :sortemáraP
21P
adidiviD:1,xelpmíS:0
.aibmacesnóicaroatsE
IO
adnabaledataeuponóicamrofnI
.aibmacesnóicaroatsE
:sortemáraP
21P
adidiviD:1,xelpmíS:0
.aibmacesnóicaroatsE
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000X in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-2000X

Kenwood TS-2000X User Manual - German - 122 pages

Kenwood TS-2000X User Manual - Dutch - 122 pages

Kenwood TS-2000X User Manual - French - 121 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info