630909
5
Zoom out
Zoom in
Previous page
1/150
Next page
h
ints
G
To make a thinner smoothie drink
a
dd more liquid.
G
T
o make a thicker smoothie drink
add more frozen ingredients but
d
o not exceed the frozen limit
m
arked on the goblet.
G
Before fitting the lid, push the solid
i
ngredients into the liquid using the
s
tirrer.
G
Use the pulse ‘P’ button to
operate the power unit in a start
stop action to control the texture
of your drink. Take care as this
automatically selects the higher
speed and may cause the drink to
be thrown up the sides and onto
the lid of the goblet.
G
After blending, some drinks may
not be completely smooth due to
seeds or the fibrous nature of
ingredients.
G
Some drinks may separate on
standing, therefore, it’s best to
drink them straight away.
Separated drinks should be stirred
before drinking.
important
G
Never blend more than the
maximum capacity of 1500ml
marked on the goblet.
G
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
G
Don’t use the Smoothie Blender
as a storage container. Keep it
empty before and after use.
G
Some liquids increase in volume
and froth during blending eg milk,
so do not overfill and ensure the lid
is correctly fitted.
G
To ensure long life of your
Smoothie Blender, never run it
continuously for longer than 60
seconds.
G
Never blend food that has formed
a solid mass during freezing, break
it up before adding to the goblet.
care and cleaning
G
Always switch off, unplug and
dismantle before cleaning.
G
N
ever let the power unit, cord or
plug get wet.
G
Empty the goblet before
u
nscrewing the blade unit.
G
Always wash immediately after
use. Don’t let food dry onto the
goblet assembly as this will make
cleaning difficult.
G
Don’t wash any part in the
dishwasher.
G
Regularly dismantle the tap and
clean the parts thoroughly.
Smoothie Blender unit
Before dismantling the Smoothie
Blender, half fill the goblet with
warm water. Fit the lid and stirrer
then place on the power unit.
Switch to low ‘ and whilst
running open the tap and allow the
water to drain into a container to
clean the valve. This can be
repeated until the water runs clear.
If further cleaning is necessary
dismantle the unit first.
power unit
G
Wipe with a damp cloth, then dry.
G
Push excess cord into the back of
the power unit.
blade unit
1 Remove and wash the sealing ring.
2 Don’t touch the sharp blades -
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the blade
assembly in water.
3 Leave to dry upside down away
from children.
goblet, lid, cap and stirrer
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open
. Wash thoroughly then rinse and
dry. Wash and dry the goblet then
refit the tap ensuring that the seal
is correctly positioned on the goblet
.
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SB270 series Smoothie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SB270 series Smoothie in the language / languages: All languages as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info