630906
3
Zoom out
Zoom in
Previous page
1/105
Next page
key
blade assembly
dispensing lid x 2
travel mug x 2
power unit
speed control
to use your smoothie
blender
1 Add ice or frozen ingredients to the
mug .
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
‘max frozen ingredients’.
2 Add liquid ingredients to the mug.
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the mug to the
level marked ‘max capacity’.
3 Hold the underside of the blade unit
and lower it onto the mug, blades
down – turn clockwise to lock .
4 Shake to disperse the ingredients.
5 To fit the assembled mug to the
power unit, turn the mug upside
down and line up the tabs on the
mug with the grooves in the power
unit and then turn clockwise until a
positive click is heard .
6 Select the required speed.
When blending recipes that include
frozen ingredients turn the speed
control to ‘low’ for 5 seconds to
start the mixing process, then turn
the speed control to ‘high’.
Allow the ingredients to blend until
smooth.
7 When the desired consistency is
reached, turn the speed control to
the ‘off’ position. Turn the mug
anticlockwise to release it from the
power unit.
8 Turn the mug the other way up and
unscrew the blade assembly.
9 Fit and lock the lid by turning
clockwise.
When you want to drink the
smoothie, simply flip open the lid
cover and clip into position . The
drink can be consumed straight from
the mug.
hints & tips
Note that when the mug is filled to
max capacity (500ml), this is
approximately two servings.
If you don’t intend to consume your
smoothie drink immediately, keep it
refrigerated.
Ensure your smoothie drink is thin
enough to be able to drink from the
dispensing lid. To make a thinner
smoothie drink add more liquid.
Once your smoothie drink has
reached the desired consistency,
you can use the pulse ‘P’ to ensure
all ingredients are thoroughly
blended. Use the pulse ‘P’ to
operate the power unit in a start
stop action to control the texture of
your drink.
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
standing, therefore it’s best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
Don’t use the Smoothie Blender as
a storage container whilst on the
power unit.
Some liquids increase in volume and
froth during blending e.g milk, so do
not overfill and ensure the blade
assembly is correctly fitted.
To ensure long life of your Smoothie
Blender, never run it continuously for
longer than 30 seconds.
Never blend food that has formed a
solid mass during freezing, break it
up before adding to the mug.
Never blend more than the max
capacities marked on the mug.
When the dispensing lid is fitted
always keep the travel mug upright.
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SB055 Smoothie 2GO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SB055 Smoothie 2GO in the language / languages: All languages as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info