606427
6
Zoom out
Zoom in
Previous page
1/8
Next page
E-1
MANUAL DE INSTRUCCIONES DEL NXR-900/ NXR-901
BASE-REPETIDOR DIGITAL 800MHz/ BASE-REPETIDOR DIGITAL 900MHz
MUCHAS GRACIAS
Gracias por comprar este repetidos de Kenwood. Creemos que este
repetidor de fácil programación será altamente efectivo en su sistema
de comunicaciones para que su personal trabaje con la mayor efi cacia
posible.
Kenwood incorpora lo último en tecnología avanzada en todos nuestros
productos. Estamos seguros de que usted quedará plenamente
satisfecho de la calidad y las características de este producto.
PRECAUCIONES
Para evitar incendios o descargas eléctricas, no exponga la unidad a
la lluvia o a la humedad.
Para evitar riesgos de descarga eléctrica, no abra la unidad en
ningún momento.
No exponga la unidad a la luz directa del sol, ni la coloque cerca de
calefactores.
No coloque la unidad en zonas excesivamente polvorientas o
húmedas, ni sobre superfi cies inestables.
Si detecta un olor o humo anormal proveniente de la unidad,
desconecte la alimentación inmediatamente y póngase en contacto
con el servicio técnico de Kenwood o con su proveedor.
AVISOS AL USUARIO
La ley gubernamental prohíbe el uso de radiotransmisores no autorizados
dentro de los territorios que se encuentren bajo el control del gobierno.
El uso ilegal se castigará con multa y/o encarcelamiento.
Solicite la reparación solamente a un técnico cualifi cado.
PRECAAUCIÓN
Este repetidor está pensado para utilizarse como estación base fi ja con
la antena situada en exteriores, ya sea en el tejado o en una torreta de
antena (salvo en EE.UU. y en Canadá).
El repetidor está diseñado para una fuente de alimentación de 13,8 V
CC. No utilice una fuente 24 V CC o mayor para alimentar el repetidor.
Utilice únicamente el cable CC suministrado.
No extraiga el núcleo de ferrita acoplado al cable de CC. De hacerlo,
podría causar interferencias con las comunicaciones por radio.
DESEMBALAJE Y COMPROBACIÓN DEL EQUIPO
Nota : La información sobre desembalaje que se ofrece a continuación
está destinada a su distribuidor Kenwood, a un servicio técnico autorizado de
Kenwood o a la fábrica.
Desembale el repetidor con cuidado. Recomendamos que antes de
tirar el material de embalaje, identifi que los elementos indicados en la
tabla siguiente. Si falta algo o se ha producido algún daño durante el
transporte, presente inmediatamente una reclamación a la empresa de
transporte.
Artículo Número de pieza Cantidad
Cristal frontal B10-2781-XX 1
Tornillo N08-0563-XX 1
Soporte J29-0725-XX 2
Tornillo mecánico plano N32-4008-XX 4
Asa y juego de tornillos K01-0421-XX 1
Cable CC E30-3344-XX 1
Cable conductor con conector (15 patillas) E37-1381-XX 1
Fusible (7,5 A) F05-7521-XX 1
Cable SYNC E30-7701-XX 1
Manual de instrucciones B62-2410-XX 1
INSTALACIÓN
Para montar las asas en el panel frontal del repetidor, alinéelas con
los agujeros situados en el panel frontal y, a continuación, fi je las asas
utilizando los tornillos suministrados.
Para obtener información sobre la instalación del repetidor y de la
antena, consulte a su distribuidor.
MICRÓFONO
Conecte un micrófono Kenwood KMC-30, KMC-35 o KMC-9C opcional
al jack MICROPHONE del panel frontal.
UNIDAD OCXO (KXK-3): opcional
La unidad OCXO (KXK-3) es un oscilador de cristal de cuarzo
termostatazo (OCXO¸ Oven Controlled Crystal Oscillator).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NXR-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NXR-900 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info