565559
51
Zoom out
Zoom in
Previous page
1/53
Next page
English51
Notes on Disposal
Recycling the Built-in Battery
This unit uses a lithium ion rechargeable battery cell as the built-in battery. The lithium ion
rechargeable battery is a recyclable resource. When disposing of the Transmitter, take out
the built-in battery and bring it to your local recycling business.
WARNING
Do not heat excessively the built-in battery, open it, modify it or throw it in fire or
water.
Excessive heat generation, explosion or fire ignition may cause a fire.
Do not leave the built-in battery near fire or under direct sunlight.
A fire, explosion or excessive heat generation may result.
Attach insulating tape on the connectors of the built-in battery.
A fire or explosion may result if the battery electrodes are short-circuited.
Do not leave the built-in battery within the reach of children.
Injury or other accidents may result.
If the built-in battery fluid leaks and enters your eyes, immediately rinse your eyes
with fresh water and call a doctor.
If the fluid is left in your eyes, an eye injury may result.
Removing the Rechargeable Battery (Built-in Battery) Before Disposal
IMPORTANT:
Never attempt to open this unit besides when disposing of it.
For replacement of the built-in battery, contact your nearest Kenwood service agent.
• Remove the built-in battery after having confirmed that it is completely discharged.
• Once the built-in battery is disconnected, do not attempt to reconnect it to the connector on
the circuit board.
• Bring the removed built-in battery to a rechargeable battery recycling business as early as
possible.
1 Open the SD card cover.
2 Remove the 2 screws from the panel
using a precision Phillips screwdriver
(+).
3 Slide and remove the front case of
this unit.
4 Disconnect the built-in battery
connector and 3 microphone
connectors.
5 Using a precision screwdriver (+),
remove the 3 screws and remove the
circuit board.
6 Using the precision screwdriver (+),
remove 2 screws and remove the built-
in battery mount.
7 Take out the built-in battery.
8 Attach a piece of insulating tape on
the connector at the end of the cable
from the built-in battery, and put it in a
plastic bag, etc.
B60-5774-00_English.indd 51B60-5774-00_English.indd 51 08.3.31 1:46:47 PM08.3.31 1:46:47 PM
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood MGR-A7-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood MGR-A7-B in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood MGR-A7-B

Kenwood MGR-A7-B User Manual - German - 53 pages

Kenwood MGR-A7-B User Manual - Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info