162220
44
Zoom out
Zoom in
Previous page
1/48
Next page
44
Troubleshooting Guide
Disc source
? "AUX" is displayed without achieving External disc control
mode.50
O-N switch is set to "O" side.
Set the switch to "N" side.
Unsupported disc changer is connected.51
Connect the supported disc changer. (page 4)
? The specified disc does not play, but another one plays
instead.52
The specified CD is quite dirty.
Clean the CD.
The CD is upside-down.53
Load the CD with the labeled side up.
The disc is loaded in a different slot from that specified.54
Eject the disc magazine and check the number for the
specified disc.
The disc is severely scratched.55
Try another disc instead.
? The specified track will not play.58
Random play or magazine random play has been selected.
Turn off random play or magazine random play.
? Track repeat, disc repeat, track scan, random play, and
magazine random play start by themselves.59
The setting is not canceled.
The settings for these functions remain on until the
setting to off or the disc ejected, even if the power is
turned off or the source changed.
? The specified track will not play.58-a
Random play has been selected.
Turn off random play.
? Track repeat, disc repeat, track scan, and random play, start
by themselves.59-a
The setting is not canceled.
The settings for these functions remain on until the
setting to off or the disc ejected, even if the power is
turned off or the source changed.
? Cannot play CD-R or CD-RW.60
Finalization processing is not being conducted for CD-R/CD-
RW.
Conduct finalization processing with CD recorder.
A non-compatible CD changer is being used to play the CD-
R/CD-RW.61
Use a CD changer compatible with CD-R/CD-RW to play.
? Direct Track Search and Direct Disc Search can’t be done.66-
1
Another function is ON.
Turn Random Play or other functions OFF.
? Track Search can't be done.66-2
For the albums first or last song.
For each album, Track Search can't be done in the
backward direction for the first song or in the forward
direction for the last song.
If the following situations, consult your nearest
service center:
Even though the disc changer is connected, the Disc Changer
source is not ON, with "AUX" showing in the display during the
Changer Mode.
Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is
connected, the Auxiliary input is entered when switching modes.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kvt-m700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kvt-m700 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info