523307
2
Zoom out
Zoom in
Previous page
1/32
Next page
2-English
Installation
The use of any accessories except for those provided might result in damage to the unit. Make sure
only to use the accessories shipped with the unit, as shown above.
2CAUTION
Safety precautions
Installation procedure
1.Remove the ignition key and disconnect the negative - terminal of the battery to prevent short
circuits.
2.Set the unit according to the intended usage.
3.Connect the input and output cables of the units.
4.Connect the Ignition wire and grounding wire following this order.
5.Install the unit in the car.
6.Connect the negative - terminal of the battery.
Be sure to turn the power off before changing the setting of any switch.
If the fuse blows, check cables for shorts, then replace the fuse with one of the same rating.
Check that no unconnected wires or connectors are touching the car body.
After installation, check that the brake lamps, winkers, and wipers work properly.
2CAUTION
.........1
q
.........2
w
.........2
e
.........2
r
.........2
t
.........2
y
.........4
u
.........4
i
External view
......... Number of items
Part name
Remote controller
(cable length:5m)
Velcro strips
(
20x60mm)
Velcro strips
(Hook : 12x65mm)
Installation
bracket
Velcro strips
(Loop :
25x70mm)
Double-side
adhesive tape
Tapping screw
(
ø3x6mm)
Tapping screw
(ø4x12mm)
Part name
External view
......... Number of items
Accessories
To prevent injury or fire, take the following precautions:
Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when
jolted.
When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or
other wires with a 0.75mm
2
(AWG18) or more to prevent wire deterioration and damage to the wire
coating.
If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your
Kenwood dealer.
To prevent damage to the machine, take the following precautions:
Make sure to ground the unit to a negative 12V DC power supply.
Do not open the top or bottom covers of the unit.
2CAUTION
2WARNING
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KVA-S300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KVA-S300 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info